Singapore, 6LED,0.5W,60Lm,Solar LED wall Fitting integrated with photocell and motion sensor,IP64,Sensor Solar LED Wall Fitting

Product Name:    6LED,0.5W,60Lm,Intelligent Solar LED wall Fitting integrated with photocell and motion sensor,IP64,Sensor Solar LED Wall Fitting

Model:  ILT- BSV-SL106

Product Features

1. Integrated design of PIR motion sensor and night sensor

2. Recharged by sunlight and stores power for overnight lighting

3. Over 12 hours of lighting time on a single days charge

4. Waterproof IP64, heatproof and durable

5. Intelligent energy saving

Specification

1. Solar Panel: 0.44W, 5.5V, 17% efficiency

2. IP rate: IP44

3. Li-ion battery: 3.7V/600mAh

4. LED: 0.5W, 6000-6500K, 60Lumens 6LEDs, working at 3-3.2V. 10-12Lm/LED,

5. Night Sensor: <10 Lux

6. Motion angle and distance: 45-60 Degree, 3m

7. High Light Delay: 30 seconds

8. Switch: Off/Auto

9. Lighting mode:

• Off
• Dim Light(10lm)
• High Light(80lm)

10.Charging time: 8-10Hours

11. size: 114*86*41mm

12. House material:  ABS

13. Product weight: 150g

Operating Instructions:

1. Unlock and activate the solar light

The internal battery is locked from factory for safety shipment, so users have to use supplied key pin to click the “On/Off” switch hole and unlock the battery and lighting system.

2. How to install the device?

Please use the supplied expansion pillar-hinge and screws to mount the device on Pole or wall anywhere outside you want for lighting.

3. Charging via solar panel:

The solar light charges automatically in daylight, please install the unit in an unshaded location with access to natural sunlight. Normally, it can be fully charged in one day under ideal bright sunlight.

4. Night Sensor function

The unit will automatically turn on to Dim light mode, and will turn off when in daytime or in bright area. 

5. Dim Light mode

In order to save power, it will auto turn on dim light when no motion over there, but the brightness also can work as signal light.

6. Bright light mode

When people walk around 2 meters close, it will turn on bright light. 

Installation

Working Process Instruction  

Warning:

1. Keep the device away from fire, water and moist places in order to avoid explosion, leakage, moisture.

2. Any severe shock to the light is not recommended.

3. No one except professional technicians should attempt to disassemble the light to avoid damaging the light. 

Special notes:

1. Please fully charger the device before first use.

2. If there is no good sunlight for 3 months, the battery may be out of power, so you have to charge it by bright sunlight. When it is fully charged, please use the supplied key pin to unlock the device and lighting system; otherwise, it cannot work anymore.

3. If the light is blink, that means the power is very low, you have to charge the battery by sunlight soon; otherwise, the device will stop working soon.

4. If there is no good sunlight or in winter sunlight, especially in Northern countries, it takes longer to fully charge the device and this is very normal for solar products.

Application