ht-cs01 touch screen thermostat in digital fan coil

Production overview

ht-cs01 touch screen thermostat

XMK-016 series of digital thermostat,applying the most advanced and
international standardized microcomputer control chip,measures the
indoor temperature by the in-built NTC high-precision sensor.It can
always compare with the setting temperature,and automatically
regulate the heating/cooling air input or switch on/off the motorized
valve,so as to keep room in a certain temperature.

 Alternative Working Modes Table

ht-cs01 touch screen thermostat

-Control the fan coil and motorized valve synchonously(The fan
stops as the motorized stops when the temperature reaches the set
value.)
-Control the fan coil and motorized valve.A synchronously(the fan

goes on working as the motorized valve stops when the temperature
reaches the set value.)
-Have clock or timing power ON/OFF function.
-Have remote control function,if it is blank,it means thermostats
do not have this function.
-Have backlight function,if it is blank,it means thermostats do not
have this function

 Optional functions

-Power on/off;
-Wind speed adjustment;
-Clock Timing
-Mode;
-Set temperature rise or adjust the set value of work mode;
-Set temperature drop or adjust the set value of work mode.

Operating Process of Tools

ht-cs01 touch screen thermostat

-It is respectively automatic wind,high speed wind,medium speed
wind,and low speed wind in turn.
-In the state of automatic wind,themostats will compare the indoor

-Step 8:Slightly press the underside corners,block the sheel and
accomplish the installation.

Malfunction disposal

-Statement:Only professional technical personnel can maintain the
products of our company.

large touch screen room thermostat in digital fan coil 

Cautions

-Please connect wires in strict compliance with the installation
wiring diagram;
-Please install a thermostat correctly in strict compliance with the
installation diagram
-Do not pull the cable forcibly,or it may be damaged;
-Do not squeeze the LCD or scratch the LCD surface during the
installation;
-During the installation,do not knock those electronic components
on the circuit board,and do not drop or deform the back cover
-If hard plastic lines are used during the installation,do bend it
into a appropriate angle firstly
-Do not drop it into construction mud.

Technical Data

ht-cs01 touch screen thermostat

The products show: 

ht-cs01 touch screen thermostat

The workshop show:

ht-cs01 touch screen thermostat