LED Tunnel Light

Specifications

1.he led tunnel lamp is a energy saving street light which can use 100-240V AC source directly
2.high quanlity glass

 

Product Instructions

 

LED Tunnel Lamp

 

The led tunnel lamp is a energy saving street light which can use 100-240V AC source directly, using green, the energy conservation and environment benefic high efficiency USA original Cree LED as light source, it controls the led(take group as unit) to work samsara by control system, make sure the operation feasibility of LED can work in long term, the lamp holder outer shell use aluminum alloy for compression casting, the matched reflection cup surface is aluminum-plating membrane, few astigmatism and even brightness, according to the road lighting's characteristic we design it like a chiropter shape, giving a long projection distance, and the light use factor is high. The diaphanous surface we use the good light-admitting and high quality toughened glass, all other components use the stainless steel material, it is dustproof, water-resistant and rust prevention. Has the environment benefic, energy saving, high luminance, low light fade and long projection distance some other characteristics. Our advantage is long life time and green environment benefic, the most main characteristic is super energy saving. It is the true environment befefic, energy saving and high tech product, and widey used in tunnel, diggings lighting and other places.

 

 

 

 

 

 

Indoor and Outdoor use   

 

Warning

1.When the product in the packing box, please do not connect the power source;

2.Before installing please do not connect the high-voltage power supply, and make sure the equipment connect ground;

3.Replace any protection cover which is bursted;

4.Attention fire protection, against electricity and quakeproof.

Before installing the product pleaseread the instruction carefully, also plsease preserve this document for future reference.

 

 

 

 

 

 

Attention

Corrosiveness orsoluble chemicals will make the outer coveringprotection of lamps to be destructed.

Normal wroking temperature: - 35°C~40°C, the humidity: 0~95%, if surpasses this prescribed limit, it will have the disadvantageous influence to thelife time. Storeing temperature: -35~70°C.

We are not be responsible for the aftereffect which use any correlative accessory are not provided by our company.

 

 

Light Function:

 

1. According to the tunnel illumination's characteristic, it controls the led(take group as unit) to work samsara by control system, make sure the operation feasibility of LED can work in long term, the rest time in turn is five minutes, 25 minutes one samsara

2. The above function may act according to the customer request to set before leaving the factory. The customer cannot set by themselves

 

Attention

1)The lamps must connect earth reliably;

2)Suggestuser in a wiring place addition arrester;

3)In the installation process all parts must lock tightly, and make sure various parts connectionreliable;

4)Lamp installation and the maintenance work must be operated by the professional.

 

 

 

 

Technique Parameter

 

Par No.	IL-TL50	IL-TL90	IL-TL120
LED Quantity	50 Pcs	90 Pcs	120 Pcs
Luminous efficiency	>85 lm/w
Input voltage	100-240V AC 50/60Hz
Input current	250m A	430m A	600m A
Input power	52W	95W	125W
Power Factor	>0.9
Power efficiency	>90%
Projection distance	Length 8m,width 4m (High 5m)	Length 10m,width 6m (High 6m)	Length12m,width 6m (High 8m)
Luminous	3500 lm	6300 lm	8400 lm
Illumination	45lux/5m	50lux/6m	48lux/8m
Lighting efficiency	>80%
Wavelength(K)	6500±500K
colouration index	Ra>75
Junction temperature	<70 degrees
Working environment	Environment temperature -35~40°C,Relative humidity 10%~90%
Storage temperature	When it doesn't work, the storage temperature is -35 ~ 80 degrees
Life span	>30000Hrs
Material	Aluminum alloy, PC,toughened glass
Size	310x306x90mm	510x306x90mm	660x306x90mm
Height of Installation	4-5M	6M	6-8M
Net weight	5KG	8KG	9.5KG
IP Rank	IP65
Installation	Hoisting screws fixed