816 two screws pipe clamp with EPDM rubber

Specifications

816 two screws pipe clamp with EPDM rubber
1.ISO 9001:2008 certification
2.full range of sizes are available
3.zinc plated

For fastening:

Pipe lines,such as heating,sanitary and waste water pipes,to walls,cellings and floors.

 

Properties:

Material:	steel DD11(material no.1.0332) acc.to DIN EN 10111
Zinc plating:	electro zinc plated,6-8µm
Resistance welded nut:	M8
Resistance welded nut:	M8/10
Resistance welded nut:	M10
Locking screw:	combi-slot cheese head screw
Acoustic insulation lining:	material:EPDM;chlorine-free;silicone-free
Sound insulation:	for DIN 4109
Temperature range:	-50° to +110°C
Hardness:	45+-5° Shore
Fire behavior:	DIN 4102:class B2

 

Avantages:

1.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.

2.It prevents the action of electrolysis.

3.Two-screw pipe clamps satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.

4.Side screws are protected against loss during assemble with the help of plastic washers.

5.Large opening angle for easy insertion of the pipes.

6.Two-screw pipe clamp with patented rapid locking and readjusting mechanism.

7.Because of reliable click mechanism, the pipe can be preinstalled and adjusted easily.

8.Two-screw pipe clamp with rubber inlay. EPDM rubber resistant to aging.

9.Locking screw secured against loss.

 

Usage:

1.steel pipes

2.cast iron pipes

pper pipes

4.glass pipes

5.plastic pipes

 

Field:

1.sanitary and heating installations

2.gas distribution systems

3.air conditioning systems

 

Technical data:

 

 

Article   Number	Pipe Dia.	Clamping range	Material	Thread	Locking     screw	Rubber         mm	PKG	Min.torque	Fzul
			b x s	G
	Inch	mm	mm				pcs/box	Nm	KN
816012	1/4"	12-14	20×1.2	M8	M6×16	20×3.5	150	70	1.1
816015	3/8"	15-19	20×1.2	M8	M6×16	20×3.5	150	70	1.1
816020	1/2"	20-23	20×1.2	M8	M6×16	20×3.5	100	70	1.1
816026	3/4"	26-28	20×1.2	M8	M6×16	20×3.5	100	70	1.1
816032	1"	32-35	20×1.2	M8	M6×16	20×3.5	100	70	1.1
816040	1 1/4"	40-43	20×1.2	M8	M6×20	20×3.5	50	70	1.1
816044	1 1/2"	44-49	20×1.2	M8	M6×20	20×3.5	50	70	1.1
816050		50-56	20×1.5	M8/M10	M6×20	20×4.5	50	70	1.2
816057	2"	57-61	20×1.5	M8/M10	M6×20	20×4.5	50	80	1.2
816063		63-67	20×1.5	M8/M10	M6×20	20×4.5	50	80	1.2
816074	2 1/2"	74-80	20×1.5	M8/M10	M6×20	20×4.5	50	80	1.2
816083	3"	83-91	20×1.5	M8/M10	M6×20	20×4.5	50	80	1.2
816101		101-107	25×2.0	M8/M10	M8×25	25×4.5	25	90	1.5
816108	4"	108-114	25×2.0	M8/M10	M8×25	25×4.5	25	90	1.5
816125		117-125	25×2.0	M8/M10	M8×25	25×4.5	25	90	1.5
816131		131-136	25×2.0	M8/M10	M8×25	25×4.5	25	90	1.5
816140	5"	140-144	25×2.0	M8/M10	M8×25	25×4.5	25	90	1.5
816159	6"	159-163	25×2.0	M8/M10	M8×30	25×4.5	20	100	2.5

 

 

 

 

Installation:

Insert pipe, press together clamp parts, tighten locking screws