Fswnd hardwood cutting/MDF cutting sawblade/HDF cutting blade

Specifications

1,SKS-66 body material imported from Japan,
2,Good heat-resistance;
3,Precise cuts
4,extremely stable
5,long edge life

Saw blade for cutting wood .more information as below

 

1 Body material

Body material: SKS-51,which is imported from Japan. The body is treated in special heat treatment, so it has high precision and good balance

 

2,The best saw blade teeth .

One of the most important things to look for in a saw blade is a good set of teeth.How long the blade will stay sharp,how clean it will cut, and how many re-sharpenings it will take all depend on the quality of the cutting tips.The cutting tips of fswnd saw blade are imported from Luxemburg .and hard enough to bear high pressure,So it could extend the cutting life of saw blade.

 

3,Advantage

1) Wood cutting saw blade. Circular saw blade. With left/right saw tooth. Suitable for cutting various sold wood with excellent smooth and edge.

 2) It is applicable to the computer controlled tandem slitter .and the design of saw blade assembly enable cutting surface to be smooth and noise to be reduced.

 3) Less chipping .help you save material

 

4,Tooth configuration,

 

Saw blade for cutting wood with left-right tooth.This tooth configuration means that the saw blade teeth alternate between a right and left hand bevel.This tooth configuration gives a smoother cut when crosscutting natural woods and veneered plywood.The alternating beveled teeth form a knife-like edge on either side of the blade and make a cleaner cut than flat top teeth.

 

5.Some models