PVC Foaming Board Multifunctional Hammer Mill

Specifications

1. Easy operation
2. High efficiency, low consumption
3. Mutiple functions
4. Viberation tested

Introduction

1.Multifunctional hammer mill is the most ideal grinding equipment for all kinds of wood chips,wood shavings,grass,straw,stalk, rice husk,palm fiber and so on.when crush plastic, PVC, rubber e.c.t ,it  adpopts water cooling structure, avoiding the damage to spare parts due to long time working friction, except biomass.It also can crush animal feed materials such as soybean, maize, cereal and fertlizer materials from animal manure , chemical etc. which is mainly used in wood factory,feed factory, organic fertilizer factory, and so on.

  
2.We will install fit hole screener sieve at the hammer mill bottom according to materials humidity.If raw materials were high humidity , then we will install 10-30mm hole screener even no screener at the bottom.  If dry, then will install 2-4mm hole screener, which means will outlet smaller than 2mm fine powder. 

  
3.The hammer mil key spare parts such as hammers and screener are made by our CNC systems, through high technical heat treatment, standing out from other suppliers is that we could ensure the parts high precision and good quality. 
 
4.The hammer mill works connect with air fan and cyclone,air lock ,dust filter ,after crushed ,the powder will outlet from cyclone bottom, which is very environmental protection and easy to collect dust.

Technical Parameter:

Model	Capacity(t/h)			Power(kw)
	Crude fiber	Animal feed/fertilizer	PVC fine grinding	Animal feed/fertilizer		Crude fiber	PVC
SG40	Φ5 0.1-0.3	0.3-0.8		7.5
SG50	Φ6 0.2-0.4	Φ2-φ6 0.5-1		15
SG65*27 Belt drive	Φ6 0.5-0.8	Φ2-φ6 0.5-2		22
SG65*27 Gear drive	Φ6 0.6-1	Φ2-φ6 1-3
65*55	Φ6 1-2	Φ2-φ6 2-3	Φ2-3.5 0.2-0.5	37	37-55		37
65*75	Φ6 2-3	Φ2-φ6 3-5	Φ2-3.5 0.3-0.8	55	55-75		55
65*100	Φ6 3-4	Φ2-φ6 4-6	Φ2-3.5 0.5-1	90	90-110		90

 

Features:

1.Multiple functions, SG hammer mill can handle most raw materials;

2.Rotor structure. It ensures no dead corner inside and makes the finished products evenly;

3.Vibration tested. SG series is our mature products, all the SG series hammer mill had vibration 

test before they are ready to sell. As a result of that, SG hammer mills have little shaking which 

makes the machine works smoothly and safety.

4.The hammer mill must works with cyclone, the cyclone can filter out the dust from finished products.

 

Video website:

 

/watch?v=KZ9YthYjL5E

/watch?v=56REF_o2K6M

/watch?v=2c7kLVe2oqs

 

Application:

Hammer mill in our showroom:

 

Hammer mill with water cooling system:

Diesel power:

Delivery:

Please do not hesitate to contact me if any questions.