cnc gantry type plasma /flame cutting machine

Specifications

Gantry type Plasma/Flame Cutting Machine
1.Panasonic servo motor
2.no deformation,high precision
3.run on track rail

cnc gantry type plasma /flame cutting machine

 

Applications:

CNC flame cutting machine is a high efficiency, energy saving cutting equipment for various thickness of carbon steel, stainless steel and non-ferrous metal plates, precision cutting stock, improve sheet utilization, saving time and material. CNC flame cutting machine can cut carbon steel thickness 5-300mm. CNC plasma cutting machine can be on the thickness of 0.5-150mm stainless steel, carbon steel and nonferrous materials under high-quality cutting.

 

Features:

1. CNC System: American Hypertherm power, Shanghai Jiutian.(optional)

2. Servo: The Panasonic original server, servo motor.

3. Beam: The box welded by heat treatment to eliminate stress, with the features of good rigidity, no deformation, high precision, light weight, small inertia .

4. Vertical drive frame (side frame): the level at both ends with guide wheel, adjustable eccentric wheel drive frame at the bottom of the compression level on the rail, so that machine in motion to maintain a stable orientation. Equipped with a dust collector, the wiping of debris accumulated on the track surface at any time.

5. Vertical and horizontal drive: have a precision rack and pinion to drive. Horizontal guide track adopts imported precision linear guide, vertical guide track adopts heavy guide track, deceleration devices adopt the Germany imported precision gear reducer. To ensure the precision and stability.

 

 

Technical Parameter:

 

Model	CX3F 40000*60000
Gantry width	4m
Track Rail Length	6m
Effective Cutting Width	3.4m
Effective Cutting Length	4.5m
Cutting Method	Flame only; Plasma only,Flame and Plasma
Drive Mode	Bilateral
Transmission	Rack and pinion drive for X and Y axes
Flame Cutting Thickness	6-200mm
Plasma Cutting Thickness	1-60mm
Cutting Speed	0-3500mm per minute
Moving Precision	0.01mm per step
Power Source	220V/380V  50Hz   500-1000W
Cutting Gas	Acetylene, Propane
Plasma Gas	Pressed air, Oxygen, N2
Torch Height Controller (AUTO)	Capacitive height control for flame cutting
	Arc voltage height control for plasma cutting

 

Samples: