12G double system automatic flat knitting machine (WH-F)

     Type

WSG122-SC/SV

Gauge

3.5.7MG, 5G,7G,10G,12G,14G

Knitting width

Variable stroke, Max 48/56'' (122/142cm)

Knitting speed

Knitting speed varies according to gauge and knitting condition. Variably adjustable speed levels, 10 additional programmable speeds, Max 1.4m/sec.

Stitch density

60 section stitch selectable, adjustable scope supported by subdevision technology:0-350.

Racking

Motor-driven racking mechanism. Max 2-inch racking. 1/2 and 1/4 pitch also available from any position.

Knitting system

Double knitting system, due to the three-way-technique it could knit, tuck, miss knit in one cam system.

Knitting function

Simultaneous transfer, front or back, independent of carriage direction.

Sinker system

Compound-type moveable full-sinker system.

Needle selection

Full jacquard selection via special eight level solenoid actuators.

Setup device

Take down comb with compound needles, it can easily catch or take off the fabric.

Takedown device

Main/sub rollers. Changeable 31 levels, automatically adjustable on each level. Automatic opening and closing.

Yarn cutter

Single-unit system includes 1 yarn cutter and 2 yarn grippers. Left and right side standard.

Yarn feeder roller

Left side standard, for especially suitable to knit yarns with low strength.

Side tensions

Side tension, 12 on each side.

Yarn carriers

16 normal carriers.

Top tensions

16 top tensions, one-touch easy threading. Large knots cause machine stop.

Stop motion

Yarn break, large knot, warp ground check, shock detection, piece count, over-torque, program error, etc.

Drive system

Belt drive. AC servo motor. No lubrication necessary.

Safety devices

Full safty cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Stop button. Power supply disconnecting device. Ultra-low speed "crawl" setting. CE Mark. Indicator lamps(see below).

Operation lamp

Green/normal operation. Flashing green/normal stop. Flashing amber/abnormal stop.

Data input

USB memory interface. Ethernet 10/100 BASE-T network interface.

Machine pattern memory

25,165,824 bits (1,024 wales x 8,129 addresses)

Control unit

Built-in controller. Stored program for flat knitting machine.

Control display

Monochrome LCD panel. Editing possible via display panel operation. Available Chinese and English.

Back-up power

Power supply for resuming knitting after power failure.

Power

Single phase AC220V+/-10%.,

About 1.5KW, max 2.5 KW.

Packing dimension and weight

L*W*H 2370X 832X2050mm           1060KG