Polycarboxylate Superplasticizer Price Concrete Plasticizer
FDN-C High-efficiency superplasticizer
(I) Properties, Features &Characteristics(FDN-C)
1. Appearance:Light brown powder &dark brown liquid. Non-poisonous,odorless, non-flammable and non-corrossive to steel bars.
2.Remarkable Plasticity:As a condition of blending where amount of cement and collapsibility are fixed aforehand, mixing water can be decreased by 16-22%when it is admixed with reinforced concrete at 0.5-1.0%. Statistically, compression strength on the 1st day, the 3rd day and the28th day after singleapplication is increased by 60-95% and 25-40% respectively when it is added at standard blend dosage. As the result, compression strength, tensile strength,buckling strength and modulus of elasticity will be improved to some extent.
3.Improve miscibility of concrete amalgamator with water and cillapsibilityas well. As a conditionof equivalent blending, collapsibility can be increased 4-6 times when it is added at 0.75% blend dosage.
4.15-18% of cement can be reserved when the agent is blended at 0.75% blend dosage,which is preconditioned by same collapsibility and strength.
(II) Parameters &Acceptance Criteria(FDN-C)
Item | FDN-C | Item | FDN-C |
Solid content(%) | ≥92% | PH value | 7-9 |
Na 2 SO4 content(%) | <20% | Net starch fluidity(mm) | ≥230mm |
Content of chloride(%) | <0.5% | Surface tension(N/m) | (70±1)×10-3N/M |
(III) Parameters&Acceptance Criteria (FDN-C for reference
Parameter | Criteria | Actual result | Parameters | Criteria | Actual results | ||
Water reduction % | ≥14 | 16-22 | Compression strength % | 1d | ≥140 | 160 | |
Water reduction % | ≤90 | 85 | 3d | ≥130 | 150 | ||
Air content % | ≤3.0 | 2.0 | 7d | ≥125 | 140 | ||
Temporal distribution for setting(min) | Initial setting time | -90~+120 | -90~+120 | 28d | ≥120 | 125 | |
Terminal setting time | Shringkage % | 28d | ≤135 | 88 | |||
Corrosion to steel bars | none | none | |||||
Note: standard blend dosage:0.75%(as cement amount) | |||||||
(IV) Usage:
1. Blending dosage at 0.5%-1% mixing dosage advised
- Prepare solution at required
- Direct use of powder agant is allowed. Alternatively the addition of the agent is followed by water moisturiztion(water-cement ratio:60%)
- The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
(V) Packing, Storage and Transportation
1.Package:
Powder:packing in woven fabric bag with plastic inner.Net weight:25kg±0.2kg,50kg±0.2kg,750kg±0.2kg
2.Caution:
Prevented from being torn by sharp-endobjects while package are being transferred or delivered.When being contained by high humidityor moisture in case of leakage, it can be prepared in prescribled ways for further use without surrending any effect.
3.It should be stored in a decicated warehouse that is well venilated and dry. If be affected with damp, just samesh or melt it into solution without any bad effection.
Product picture:
Contacting person:
Sale manager: Zhang Jun
Mobile/whatsapp:008615315596920
Email:
Skype:fengyulu1982
Send Inquiry to This Supplier
You May Also Like
-
High Quality Concrete Admixture Material in Thailand MarketingUS$ 450 - 480MOQ: 20 Metric Tons
-
High Performance Early Strength Agent for Cement Based Self-leveling CompoundUS$ 13 - 15MOQ: 100 Kilograms
-
Sulfonated Melamine Formaldehyde Superplasticizer SMF 10 Melment F10 for Gypsum & Concrete AdmixtureNegotiableMOQ: 1 Metric Ton
-
Dispersant NNOUS$ 300 - 550MOQ: 1 Ton
-
Redispersible Polymer AP2080 for Tile AdhesiveNegotiableMOQ: 1 Short Ton
-
High Range Water Reducing Type PolyCarboxylate Ether (PCE) Polymer PolyCarboxylate SuperplasticizerNegotiableMOQ: 20 Barrels
-
Commercial Self-Leveling Cement for PVCCNY 1200 - 2000MOQ: 1 Ton
-
Hydroxyethyl Methyl Cellulose HEMCUS$ 1 - 2200MOQ: 1 Metric Ton
-
Concrete Additive (defoamer)Silicone Solid DefoamerNegotiableMOQ: 1 Ton
-
Tea Saponin Air Entraining AgentUS$ 3.5 - 5.5MOQ: 10 Kilograms





