China Hot One Component Polyurethane Glue for Metal Panel

 Application instruction of polyurethane adhesive:

  1. Clean the target material surface.

  2. Evenly spread the adhesive, about 150g/SQM.

  3. Cover the material by raising pressure(about 0.5-1.0kg/cm2).

  4. Release the pressure after adhesive solidified.

  5. Wash the tools with acetic ether solvent.

  Note of polyurethane adhesive:

  1. Must press the target material within the adhesive active period, but not 

  after the solidifying;

  2. Press time: about 4 hours in summer, 6 hours in winter, 24 hours  

  to reach the best intensity. To short the time, some water can be  

  sprayed on the adhesive.

 Storage of polyurethane adhesive:

 Stored in warehouse or indoor, keep sealed, shelf life is not less than 6  

  months.The rest glue should be sealed with cover to avoid solidification.

 Package A is 25kg/plastic barrel;

   Package B is 200kg/iron drum.

   One 20' container loads 720 barrels/90 drums/18 tons

Mr.Berlin

Skype: chinaeps1

Mob:+0086 136 5616 6310                                                                                                     

E-mail: pu_machinery(at)