Good quality cylindrical roller bearings/rodamientos/rolamentos NU 1006M

1.Industry package: Plastic paper+Kraft paper,10pcs or 5pcs/roll

2.Plastic tube: 10pcs/tube or 5pcs/tube

3.Single box: plastic bag+single box, OEM supply

4.Carton: Standard export carton(380*240*180mm) or as your need.

5.Pallet: Wooden or Iron pallet with plastic film against moisture.

6.Pallet size: 100*76*76(cm), 0.58CBM

7.Package as your requirement

8.Mark : X&Y SRBF WYP

Brand: X&Y WYP SRBF;as your requirements,we can do the brand as your needs.

Service:OEM,Buyer Label Offered,Design Service Offered.

Company Certifications: ISO9001:2008,BV,CE

Main Markets:

Eastern Europe,South America,Domestic Market, Brazil,Russia, North America,Turkey etc.

Main Products:

• Deep Groove Ball Bearing,Angular Contact Ball Bearing,Thrust Ball Bearing, Self-aligning Ball Bearing
• Taper Roller Bearing,Cylindrical Roller Bearing,Thrust Roller Bearing, Spherical Roller Bearing
• Pillow Block Bearing

  Maintenance
In order to give full play to the bearing and maintain its long-term performance should be really good regular maintenance ( periodic inspection ) .
Through appropriate periodic inspection , failure to achieve early detection , to prevent accidents in the first place , to improve productivity and economy is very important.
Custody
Bearing at the factory are coated with anti-rust oil and use the right amount of rust-proof paper packaging , as long as the packaging is not damaged , the quality will be guaranteed.
But long-term storage , to be less than 65% humidity , the temperature is about 20 °C under the conditions of storage on a shelf above the ground 30cm appropriate. In addition, the storage place should avoid direct sunlight or contact with the cold wall .
Clean
Remove the bearing inspection, the first recorded appearance with good photography and other methods. In addition, to confirm the remaining amount of lubricant and lubricant samples , and then cleaning bearings.
a, bearing coarse washing and cleaning of fine washing, and at the bottom of the container used in the metal grid .
b, coarse wash , brush , etc. used in the oil or grease clear adhesive material . At this point , if the rotation bearings in oil , foreign bodies , such as damage due attention to the rolling surface .
c, sperm washing , in the oil slowly rotating bearings shall be careful .
Often used as a neutral cleaning agents without water diesel or kerosene , is sometimes necessary to use warm lye . No matter what kind of cleaning agent used , filter should always be kept clean.
After cleaning, immediately bearing grease coated anti-rust oil or rust

CLICK HERE GO HOMEPAGE!