Combo Facial Steamer with magnifying lamp

Beauty equipment Facial steamer+Magnifying Lamp 

   The basic concept of this facial steamer BE-1000BM, which has the newest modern design and fashion,  is that it uses electronic heat to boil water for producing steam. And then it uses the ultraviolet lamp to decontaminate the steam. Finally it passes the sterilized steam to skin where needs to be cared.  While out of water, it will cut off power and raise an alarm to remind the operator what will have to be done, which can save energy and prolong its service life. Its smooth and beautiful shape, high-tech parts, flat tube can be rotated left and right at an angle of 90 degree, alarm function...etc.                          

Operating Methods

1.  Bolt the middle pillar on the four-wheeled stand first, then insert the middle pillar into   the lower pillar and fix it, finally put the machine on the middle pillar.

2.  Put the silicon slice into the steam room, and then put the cup onto it, setting the cup holder in tight position. An instrument has been finished assembling like this.

3.  Add water through the pouring hole below the standard level.

4.  Set Vapor switch to "ON" position.

5.  Set Ozone switch to "ON" position.

6.  If you want to stop operation, turn off steam switch. Light off indicates off.

Cleaning  & Maintenance

1. This facial steamer has not only a self protection function but also an alarm function.   It will cut off power  while out of water and will be on automatically  in 5 minutes after  water has been put into.

2. If the cup get dirty cuased by the bad quality of water

3. Do not come too close to the steam. Or its high temperature will harm the skin.

Functions

     Using steam, which has been decontaminated by the ultraviolet lamp, to moisten and whiten the skin, promote blood circulation and expedite its metabolism, so that the sediment deposited in sweat pores can be easily discharged, and the balance of body's condition can also been improved.