Addressable ws2801 smd rgb point led dot light outdoor project

Specifications

50mm rgb pixel led point source light
1.WS2801 IC,DC12V,0.72W
2.IP66.SMD5050 led
3.SD controller,DMX compatiable
4.CE&RoHS

ws2801 programmable 50mm rgb led dot matrix display for night club decoration

 

Description:   

ws2801 smd rgb 50mm pixel led 

1.DC12V,0.72W/pcs,1.44W/PCS

2.3pcs or 6pcs SMD 5050 LEDs per dot module 

3.SD card controller, dmx512, artnet controller Individually control,Waterproof IP66

4.This product could be linked up to 20pcs/string.

5.Can achieve effects of full-color running water,chasing and scanning.Depending on the different installation methods may compose different dynamic effect of different color's character and design.

6. The spacing between lamps can be chose according to the building height.

7. The pixels are connected by 4-connector cable.+12V(Red),Ground(Yellow),Data(Green),Clock(Blue). Or we can tailor-make the color of cable for you .Data is shifted down from one pixel to the next so that you can easliy cut the strand or attach more onto the end.

 

Specification:

Products Name	50mm RGB pixel led dot light
Model NO.	SJ-50ICRGB
Power Consumption	0.72W,1.44W
Work Voltage	DC12V
Beam Angle	≥140
LED Quantity	3pcs or 6pcs SMD5050RGB
Color	Full color(ICRGB), changeable, pixel, digital, dream color, magic color
IC chip	WS2801, lpd6803
Waterproof Grade	IP65, IP66, IP67
Work Temperature	-40-60°C
Life-span	50,000H
Certificate	CE&RoHS
Warranty	2 years

 

Application:

1.Outdoor signs.

2.Christmas lighting solutions

3.Advertisement light box and billboard

4.Widely used in large-size LOGO

5.Decorative lights for holiday, event ,show, exhibition

6.DIY light for home use

7.Exposed luminous characters

8.Painted screen etc.

 Picture details:

 

3leds 6leds available 50mm milky cover pixel led waterproof IP66.

 

 

Each led use 4 screws to mounting on board or wall.

20pcs/string,  2pcs 4pin male and female connectors on each end of the string. 

This connector also can be made in waterproof, then need T-connector to power supply.

 

 

Controller:  DMX controller & decoder & SD controller & arduino controller, t-1000S.

 

 

Effect:  every pixel led with ws2801 or lpd6803 control, can change color individually.