SVC-1KVA avr AC automatic voltage regulator

TND/TNS series automatic AC voltage regulator is composed of the contact voltage regulator and automatic control circuit. The voltage signals are sampled and amplified to control the servo motor to drive the rotating arm and the electric brush to rotate in the desired direction so that the output voltage can be adjusted to the rated value to achieve the purpose of stabilizing the voltage. Performance indicators fully meet the Q/ZT 78 standard.

The voltage stabilizer has the advantages of beautiful appearance, small size, light weight, low power consumption, complete protection function, stable and reliable, and low output waveform distortion. Can be widely used in industrial production, scientific research, medical and health, household appliances, such as power grid voltage fluctuations or large power grid voltage seasonal changes in the region, can provide high-quality power supply to any load.
Meet the standards: JB/T 10089, Q/ZT 78.

2.1 ambient temperature: -5℃- +40℃.

2.2 relative humidity: no more than 90% (temperature is +20℃).

2.3 the installation location of the altitude is not more than 2000m.

2.4 installation: the installation environment should be well ventilated, no obvious pollution, corrosive gases, dust, flammable and combustible gas.

For your safety, please read the following selection requirements and precautions when ordering:

5.1 this series of three-phase product input and output for three-phase four wire system connection, so the use must be used to meet the zero line;

5.2 three-phase stabilized voltage power supply in single-phase application or three-phase applications, each phase output maximum capacity of 1/3 of the nominal capacity of the machine.

5.3 under normal circumstances in the selection of power equipment rated power, power surge current, inductive or capacitive load conditions to choose a reasonable voltage regulator

Power supply, the output capacity should be left to a sufficient margin, especially the impact of load type selection margin to be greater, the specific type of safety factor table (1)

Table (1)

5.4 when the input voltage is lower than 198V, the output capacity of the regulator has declined, so to reduce the load drop to avoid overload, the specific characteristics of figure(1);

When using the 220V output or the use of the same time, the maximum total output current shall not exceed the rated output current, using the maximum capacity of 110V output is only half of the rated capacity;

When the input voltage is lower than 198V, it should be used in reference to figure (1) curve, so as to avoid overload.

6.1 inquiries / technical consulting / service will be returned within 10 minutes of the working day.

6.2 the best quality; reasonable price; accurate time; timely and effective service.

6.3 OEM/ODM services, we can put your company name or logo printed on the product and packaging, but you should give us a trademark license.

6.4 all of our products have two years of warranty, we can provide services for more than 2 years of warranty products, of course, you need to pay the cost of the corresponding.