ipl&rf (Model:HS-660) (CE certificate, ISO 13485,Factory registered in FDA)

Specifications

ipl&rf No.:HS-660
Eliminate wrinkles,
skin rejuvenation &skin lifting,
improve coarse skin,
remove speckle and so on

ipl rf  (Model:HS-660-1M)  (CE certificate, ISO 13485,Factory registered in FDA)

  

How it works

E Light(IPL and RF)combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling.

When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling.

The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.

 

Application of beauty equipment:E-Light system: HS-660

Skin tightening, skin lifting, improves flexibility and tone of skin; Skin rejuvenation: fine wrinkles, pigments, freckles, vascular lesions (telangiectasis)

skin whitening, change large hair pores;

Hair removal;

Acne removal: improve the situation of oily skin; kill acne bacilli.

 

Advantages:

 

Designed according to abundant clinical data worked out by many famous clinical doctors;

RF energy can be applied to any type of skin;

Used in deep color skin or light color hair;

Combining with IPL, RF decreases burn risk and uncomfortable feeling significantly; No side effect;

Special designed ISL device can monitor the skin temperature to ensure a safe treatment;

Easy to operate: The handpiece tip is smart and can be applied on the skin directly

  

Technical Specification:

• HS-660-1M                (1xIPL, 1xRF 1Mhz Bipolar)
  Floor Standing Type
• two handpiece
• IPL-12x35mm spot size
• 5pcs filters: 420/510/560/610/640~1200nm, (480,585,690,755nm optional),
• RF with 3pcs tips: ¢18,¢28,¢37mm,
• 8" True color touch screen TFT LCD
• IPL 1,200W power,
• Xenon lamp
• IC smart card (shots controlable),
• IPL Energy:10~50J/cm2
• Pulse Sequence:1~6 puls (Adjustable)
• Pulse duration:2-20ms, RF Power output: 200W
• 
• 
• 

 

Company Advantages:

 

a.      Scale: Our Company is one of the most leading manufacturers in China.

Apolo Registered Capital is RMB 2,000,000 which is much more than most of other smaller manufactures in China. Pls check our alibaba website to checking the Trustpass profile.

 

Most of other smaller factories capital is only between RMB 500,000~1,000,000, you could check their alibaba website. Alibaba Website is a well-known B2B company in the world, so the information offered by factories should be approved by Alibaba.

Only true information could be approved, so you could have no doubt on the data.

If you still have some doubt, you could require factory to send you their Registered certificate to confirm the capital whether true.

 

b.     Real Manufacturer instead of Trading company

 As Apolo is real manufacturer instead of trading company, our price is much competitive than Trading company. Also we could offer after-service in-time but trading company could not. Welcome customer to visit Apolos factory and others, then you would find out who is real manufacturer, whos trading one.

 

Address:  1~4F, Building A, No.388, Yindu Road, Xuhui District, Shanghai, China.

Contact: Shelly

Cell phone: +86-13671823506

Pls feel free to call me when you come.

 

c. Certificate

 

(C.1)   ISO 13485

 

Our company have passed ISO 13485 system. Very few factories in China have passed ISO 13485, most of them only pass ISO 9000/9001.

As ISO 13485 is an international approval for recognizing the Quality&Management system of Professional Medical manufacturer, but ISO 9000/9001 is only for common factories instead of professional medical factories, so ISO 9000/9001 is easy to pass, ISO 13485 is hard.

Without ISO 13485, the environment and quality of these factories would be not recognized by developed countries.

 

(C.2)  CE 1023

 

Our equipment have got CE 1023 medical approval.  Pls be noted its a medical approval, not like common CE approval. Very few factories equipment have got CE 1023 medical approval, as CE 1023 need more strict test and very hard to pass.

With other common CE approval, you could only sell equipments to beauty salon in Europe.

With our CE 1023 approval, you could not only sell the equipments to beauty salon, but also to hospital and clinics in Europe.

 

d.     ODM/OEM Free on design

 

We're one of the most leading manufacturers in China and could offer OEM/ODM without any design fee

 

e.      Warranty

 

We could offer 1~2 year warranty for unconsumable parts;

For consumable parts, like Lamp: Standard lamp guarantee 50,000 shots, Optional high-end lamp guarantee 100,000 shots.

 

f.    After-market Service

We're one of the limited companies in China who have the ability to dispatch our engineers to do after-service in customers' area.

 

g.      Free Training

 

h.      Taiwan Team and American technology

The consistently upmost quality of our products are based on advanced American technology, excellent R&D teams from Taiwan and Mainland China, comprehensive QM complied with ISO 13485 and 93/42/EEC standards.

 

 

For further details ,please directly contact with me . 
Best regards