High perfomance 220V-240V screw holding screwdrivers

In carton

Specifications

High perfomance screw holding screwdrivers
1.Direct plug-in type
2.High accuracy
3.Large torque range

High perfomance 220V-240V screw holding screwdrivers

Features of the screw holding screwdrivers:

1, Drag cup DC brushless of the screw holding screwdrivers is made up of stator, rotor set, End cover, hall sensor.

2 Prominent characteristics of the screw holding screwdrivers is the structure of the stator group. The stator group is made up of enclosure, stator punching, winding cup.

3, Enclosure of the screw holding screwdrivers: adopt stainless steel, rusty,  no magnetic conduction, high strength

4, Stator punching of the screw holding screwdrivers: adopt  annular  silicon sheet, without gaps do not produce the cogging torque

5, Winding cup of the screw holding screwdrivers: enamelled wire is cylindrical shape, enameled wire slot with higher rate
6.The highest speed 900rpm design and offer two years warranty for free repair service.
7. the screw holding screwdrivers  is ues the high efficiency brushiess motor gives unsurpassed durability.
8. the screw holding screwdrivers is adopt the carbon brushless motor that it will reduce the business cost effectively.
9. the screw holding screwdrivers is brushless motor design that is available in the clean room operation.

10. the screw holding screwdrivers is adopt excellent gold plating switch that it can raise the contact spot life up to
11.  the screw holding screwdrivers is 10 million times and reduce the maintenance cost.

12. the screw holding screwdrivers is no any carbon perticle flow out not only responses to the earth environment 

13. the screw holding screwdrivers is protection but also reduces air pollution.

Details of the screw holding screwdrivers:

Specifications of  the screw holding screwdrivers:

Model	Voltage	Torque range(kgf.cm)	No load speed(rpm) ± 10%	Torque accuracy(kgf.cm)	Screw(mm)	Bit size(mm)	Size	Weight(kg)
SJ-600	200-240V	2-35	900	± 0.3%	1.6-6	SS1/4	Φ 42*220	0.51

Applications of the screw holding screwdrivers:

1.screw holding screwdrivers is automatic screw holding screwdrivers. When the torque is locked, the clutch will automatically trip, the motor power will be auomatically off and the screw holding screwdrivers will stop running.

 2.  screw holding screwdrivers  is  Brushless aerospace-graded motor is used and produces no dust,low noise and durability. Maintenance is not necessary.

 3.  The forward/ reverse switch of  screw holding screwdrivers is  designed according to ergonomics allowing the one-handed opreation.

 4. Torque adjustment of  screw holding screwdrivers is easy and convenient step-less adjustment by rotating the torque adjustmnet right to the left or to the right. Speed can also be adjusted to High(Hi) or Low(L0).

 5.  screw holding screwdrivers is for four screwdriver heads( A,B,C, and D) are available.

Advantages of  the screw holding screwdrivers:

1, the screw holding screwdrivers is non-carton brush: do not produce carbon powder, no pollution, used by clean workshop

2, the screw holding screwdrivers is long life: no need to change the carbon brush, life is only limited by bearing life

3, the screw holding screwdrivers is efficiency: brushless motors with high efficiency, long time not too hot

4, the screw holding screwdrivers is low noise, no carbon brush friction, low noise

5, the screw holding screwdrivers is no interference: when using not interference to power and other electronic products

6, the screw holding screwdrivers is simple and excellent clutch performance: the electronic control precision and realize on-off to stop using force and the small, long time holds no fatigue

Main points of the screw holding screwdrivers:

1.Direct plug-in(AC220V)type,high accuracy,large torque range.Inside double insulation,automatically reset fuse and indicator light conform ISO standard.

2.Designin ergonomics handle and anti-slip ensures operator comfort.

3.Transmission is the part which obtained national level patent and has longer life cycle.

4.Ensure accuracy in fastening with precision designed automatic shut-of clutch .

5.Plus the overload protect design,it can ensure each screw can be quickly and well luck one time.All these features are what we want to provide to our customers.

screw holding screwdrivers of our company:

 

The main products of our company:

 

Air tool,soldering pot,screw holding screwdrivers,plastic tool box ,soldering station,dispensing machine,hot melt glue gun,hot air gun, soldering pump,soldering iron,tool parts,hot fix applicators and so on.

         Dongguan Century Hardware Tools, your BEST choice!

         Dongguan Century Hardware Tools S&T Co.Ltd,a subsidiary enterprise of Taiwan Century Technology Enterprise (Holding) Co., Ltd, which is a new enterprise integrating the R&D, manufacture, sales and foreign trade of hardware,tool box and electronic tools.

       We are a professional company of screw holding screwdrivers which is a large scale manufacturer integrated with development,production,trade and service.Our factory specialized in high quality screw holding screwdrivers, air tool,soldering pot,screw holding screwdriversand so on.

       Our factory of  screw holding screwdrivers  have a wide range,good quality, reasonable prices and stylish designs,our products of  electric screwdrivers are widely recognized and trusted by users.

       Any questions about screw holding screwdrivers,please send emails to us or talk on Trademanager!

       Our company warmly welcomes clients from at home and abroad to visit us for business negotiation, and we are seeking provincial, municipal and regional distributors in Mainland China. Our modes of operation include Brand Agency and Direct Factory Sales. Hope that the people with the same ideals could join us to create a brilliant future.