chinese silver charcoal machine

Specifications

silver charcoal machine
1.Do not add any binder and harmful chemicals
2.Less investment and quick

 coal and charcoal machine  

 

1.Company Introduction

 

Henan SanXiong Heavy Industry Co., Ltd was founded in 1984, is an international company which specialized in producing and developing new charcoal series equipment, continuous charcoal production line, energy saving gasification carbonization furnace, new activated carbon production line and other products of professional manufacturers, We are the No.1 in National charcoal industry

 

2.What isenvironmentally friendly continuous charcoal powder production line?

 

environmentally friendly continuous charcoal powder production linemeans recycling all gas Produced during carbonization, after the processes such as spray ,cooling, Purification system ,the resulting secondary combustion of combustible gas Be burning again. Circulated by such a manner, use combustible gases generated from the combustion of the autologous self to achieve energy saving, and the whole process without gas out,achieve international environmental requirements.

 

3.The Advantage of environmentally friendly continuous charcoal powder production line

 

1)        The friendly continuous charcoal powder production line have 3 Outstanding advantages :1.Energy saving2. environmentally friendly3. efficient

2) The main parts are imported with good quality

3) have Professional technical support, no risk

4) The production line have high carbonized rate ,The charcoal power can burning a long time, have high heat

 

4.environmentally friendly continuous charcoal powder production lineproduction processes

 

gasifier gasification →purifying spray cooling → lit stove heating → the raw material delivered to the host cutting → drying → charring → cooling conveyor → finished product conveyor → finished bagging

 

 

5.What can be the material of environmentally friendly continuous charcoal powder production line

 

Our environmentally friendly continuous charcoal powder production line have wide range of sources of raw materials: sawdust, branches, rice husks, bamboo shavings, peanut skin, sunflower shells, coffee grounds, North and South straw

 

Sawdust

 

Branch

 

Coffee grounds

 

Rice husk

 

Bamboo shavings

 

After carbonized palm shell

Etc...

 

6.carbonized principle and operating procedures

 

1 .Turn on the power: 1. control cabinet2. water supply system

 

2 .the gasifier gasification:

 

1.   to gasifier into combustibles (such as sawdust, wood trim, crushed reed, rice husk, straw, straw, etc. Choose one available), the thickness of about 20cm ignited, and start the fan, the fan frequency to 20Hz, burned and then further added to the gasifier 15-20cm combustible mulch is good, can not see the fire stops, and then the fan frequency to 30Hz;

2.   flue gas produced through gasification gas pipeline into the cooling spray cleaning system for cooling becomes combustible gas purification;

3.   combustible gas through the pipeline at the bottom of the stove into carbonized host site, the host can ignite carbonization stove heating pipe etc.

4.   after the temperature reached 400 ° C, to turn on the control cabinet product conveyor, cooling conveyor, charring the host material transfer switch;

5.   material into the host, on the top two floors charring charring machine inside the tube material for drying;

6.   subject material into the tube after the beginning of the following two charring charring;

7.  charring good product into the cooling tank, screw conveyor through three boxes at the bottom of the cooling output;

8.   finished in the bottom of the tank by the screw conveyor cooling output;

9.   finished bagging.

 

Filler

 

Purification spray cooling system

 

Double carbonization furnace

 

Carbonization furnace at the bottom of the flame

 

7.carbonization temperature and carbonization rate adjustments

 

1 carbonization temperature is too high, can reduce the frequency of the induced draft fan, enough is enough;

2 carbonization temperature is too low, the frequency can be increased fan, enough is enough;

3 according to the different materials used to adjust fan speed high and low frequency and the host.

 

8. yield:

 

Single row of about 300 kg per hour production line, double line 600-800 kg per hour, the output according to different raw materials, along with changes

 

9. control:

 

divided into ordinary regulation and automatic control, can be based on user needs for party PLC(programmer logic controller) automatic control, console configuration color display.

 

10.the sell of charcoal power

 

For it is of waste renewable energy, can produce more heat than similar materials charcoal, can be used in domestic heating,barbecue food, the international market demand is very large, the industry can replace coal or heavy oil fired steam boiler, but also silicon carbide plant , explosives plants, pharmaceutical plants, garment factories, sewage treatment plants, mosquito plant, activated carbon plant and other industrial raw materials.

 

We are professional, reliable, do not hesitate to contact us!

Proceed!!! If next millionaire is not you... then nobody!!!

Sales manager:                 Ally Yang

Skype:                       ally.yang6(full name)

Mobile phone:                  0086 1561 76609 68