KG940A Bore Hole Drilling Machine for Hard Stone

Specifications

KG940A Bore Hole Drilling Machine for Hard Stone:
1. Commins Engine
2. Reliable hydraulic system
3. Dig depth: 20-25 m

KG940A Bore Hole Drilling Machine for Hard Stone

High Wind Pressure Open-Air KG940A Bore Hole Drilling Machine for Hard Stone

 

Safe and Stable Travelling System of  KG940A  Bore Hole Drilling Machine for Hard Stone

 1. This machine has low gravity center and big ground clearance, and can easily travel on bumpy road. It is driven by special wheel motor. That brings it strong grade-ability and low failure rate.

 2. Equipped with advanced auto-balance and brake system, makes the crawler rock drill travel stably and also greatly reduce its impact force to ensure the drive safety.

 3. Special anti-lock device greatly improves the crawler rock drill’s reliability.

Vehicle-mounted diesel engine provides strong power, so the crawler rock drill can freely travel without air compressor.

 

Powerful and reliable engine of KG940A Bore Hole Drilling Machine for Hard Stone

1. Adopt famous 4-cylinder
diesel engine as driving force which has advantages of large power, small volume, small vibration and reliable operation.

 

2. Adopt patent diesel engine air inlet regulating device (Patent No. : 200820087606.3) and desert air filter three-stage filter. That strengthens the crawler rock drill’s adaptability to severe environment and lengthened the diesel engine’s service life.

 

New Drilling boom of KG940A   Bore Hole Drilling Machine for Hard Stone

Optimally designed luffing mechanism and round drilling boom with the advantages of neoteric structure and easy maintenance greatly improves the drilling hole’s coverage area. That also makes low-order horizontal hole drilling available.

 

Powerful feed mechanism and rotating system of  KG940A    Bore Hole Drilling Machine for Hard Stone

1. The new rotating system is composed of orbit hydraulic motor and planetary gearbox. That provides the crawler rock drill with strong torque reserve and reduce the sticking drilling rate.

 

2. The feed mechanism driven by high power hydraulic motor can generate 20 KN lifting power. Adjust the pressure regulating valve on the control valve can got the favorable driving power which is required by the working condition.

 

 

Specification of KG940A Bore Hole Drilling Machine for Hard Stone

Model   Specification	KG940A
Improved by:	KY140
Rock hardness	F=6-20
Hole diameter(mm)	105-165
Drill depth(m)	25
Pressure (Mpa)	1.0-2.4
Air consumption (M3/min)	12-24
Rotating speed (Km/h)	0-63
Lifting capacity (KN)	20
Drill rod specification(mm)	76×3000 /89×3000
Gradeability	30°
Ground clearance(mm)	320
Walking speed (km/h)	2.0
Drill arm rising angles (°)	-15~+50
Drill arm swing angle (°)	±45
Carriage swing angle(°)	±50
Carriage pitch angle (°)	180
Carriage Compensation(mm)	1200
Overall Dimension (L*W*H)(mm)	5850×2250 ×2020
Total Weight (Kg)	5500
Note:	Pneumatic -hydraulic

 

 

Comparison between KY140 and KG940A    Bore Hole Drilling Machine for Hard Stone

	KY140	KG 940A	Advantages
Drill boom		New type drills boom	Simultaneously drill horizontal hole and vertical hole
Hydraulic system	28.2 pump	32 pump,big diameters, new type valve groups, new type joint.	Flow is increased, resistance is reduced.
Carriage parts	Channel Steel Carriage	thick plate reinforced carriage, pressing plate	Rigidity is increased, Abrasion is reduced
Air control system	Ball valve	side valve type c oncussion relief valve	Easy operation
Rotation speed	62 r/min(1700)	71 r/min (diesel engine 1700r/min) 100 r/min(diesel engine 2200 r/min)	Improved by 14%
Advance speed	530mm/s	580mm/s	Improved by 10%

 

 

 

 

 

Specification of Mobile Screw Air Compressor

Model	Work pressure (Mpa)	Capacity (m3/min)	Diesel engine (hp)	Weight (kg)	Dimension (mm)
LGCY-12/10	1.0	12	YuChai YC6108ZG (110KW) or Cummins 4BTA3.9-C125 (93kw)	3500	3600*1900*2200
LGCY-13/13	1.3	13	Cummins 6BTA5.9-C180 (132kw)	3500	3600*1900*2200
LGCY-15/13	1.5	15	YuChai YC6A-240-20 or steyr  WD415.23	3500	3600*1900*2200
LGCY-18/17	1.7	17	Cummins 6CTA8.3-C260	3500	3600*1900*2200

 

PARTS OF Pneumatic Track Drill

 

OUR PRODUCT SCOPE:
1. Mobile Crusher: portable jaw crusher, portable impact crusher, portable cone crusher, portable construction waste crushing plant
2. Stone Crusher: jaw crusher, impact crusher, Symons cone crusher, spring cone crusher, sand making machine, hammer crusher, ball mill etc.
3. Auxiliary equipment: vibrating feeder, vibrating screen, belt conveyor, crawler rock drill

More information about our  Bore Hole Drilling Machine for Hard Stone , please feel free to contact with us by phone or e-mail at any time, we will try our best to cooperate with you!