High quality instant water heater for bath

The  Heating Element, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesn’t work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.

Characteristics & Properties

* Tube diameter: Φ8.3mm
* Tube Material: Aluminum,iron,Stainless steel
* Insulation Material: MgO
* Conductor Material: Nichrome Resistance Wire
* Wattage Density: High/Middle/Low (5-25w/cm2)
* Lead Connection Option: Threaded Stud Terminal or Lead Wire
* Lead Wire Type: 300mm Standard  

Suggested Applications

* Water Deionized, Demineralized, Clean, Potable, Process
* Industrial Water Rinse Tanks
* Vapor Degreasers
* Hydraulic Oil, Crude, Asphalt
* Lubricating Oils at API Specified Watt Densities
* Air and Gas Flow
* Caustic Solutions
* Chemical Baths
* Process Air Equipment
* Boiler Equipment