dry-type dust control systems, dust collector with pulse valve

   dry-type dust control systems, dust collector with pulse valve 

Product description:

DMC pulse jet bag filter makes the compressed air as driving force for cleaning air, uses pulse injection organization releases the compressed air instantly and induces the severalfold secondary air into the filter bag at high speed to make the bags expand rapidly so as to impact,shake and reverse flow to clean the dust. 

Features:

1.High Purification efficiency, ability to handle large gas

2.Stable performance , long service life

3.Convenient operation and maintenance

4.Suitable for dust removing of a variety of multiple points of dust producing

Unit structure:

Dust collector is made of five parts: the upper, middle, lower box, ash systems, and blowing system, blowing system include control instrument, solenoid valve, blowpipe, and gas bge .Box include inlet and outlet box, perforated plate, filter material, dragon skeleton and Venturi tube . Details pls refer to the operating instruction manual.

Operating principle:

Dusty gas from the air inlet of dust collector into the middle and lower box, through the bag filter’s effect, separate the dust from gas, dust was adsorbed on the surface of dust bag, clean air is discharged to the outlet through filter bags, dust attached to the surface of the filter bag grows thicker as time goes by, according to the setting of injection procedure, pulse injection valve receives the order issued by the controller, trigger to open in order, the compressed air in the gas bag spray out from each hole of injection tube and jet into each corresponding filter bag via venturi, the dust attached to the surface of filter bags fall off into the ash hopper and expel from ash valve.

Applicable scope:

It can be widely applicable to Cement, electronics, chemicals, food processing, metallurgy, casting, carbon materials, machining, Timber and building materials etc. industries.

Technical parameters: