Supply lathe machine from Sophia

main parameter of the lathe.

The working table area is 800×800 mm and the table is double exchange working table.

The main specification and technical parameters:

Working table Working table size

800×800 mm

Working table load-bearing 2000(equispaced) kg

T-type slot width 18×9 mm

Working table number 2(double exchange table)

Exchange time 25 s

Processing scope vertical column maximum stroke——X axis 1350 mm

Main axis box maximum stroke——Y axis 1100 mm

Working table maximum stroke ——Z axis 1100 mm

Working table rotation——B axis 1°×360

The processing part maximum rotation diameter  φ 1250 mm

The processing part maximum height 1200 mm

The distance between the main axis end section and working table center Maximum 1250 mm

Minimum 150 mm

The distance between the main axis center and working back section Maximum 1150 mm

Minimum 50 mm

The main axis Bore-hole(7:24) ISO50

The front bearing diameter φ 110 mm

Revolution scope (stepless) 20-6000 r/min

The maximum output torque 832/1102 N·m

The main axis motor power 17/22.5(30 min) kW

The main axis trend maximum resistance 10000 N

Feedrable Cutting feed speed scope X,Y,Z 1-24000 mm/min

Rapid moving X axis 24 m/min

Y axis 24

Z axis 24

Magazine tool and automatic tool changing device Tool magazine capacity 40 Pieces

Cutting tool selection mode Random

Cutting tool maximum weight 20 kg

Cutting tool maximum length 400 mm

Cutting tool maximum diameter φ125(When the adjacent pots are empty, the diameter is φ250) mm

Cutting tool changing time 4 S

Cutting shrank specification ISO 7388/1-A JT50

Pop-rivet model ISO 7388/2 LDA-50

Lathe fixed position precision X,Y,Z axis JB/T8771.4-1998 0.020(Closed-loop 0.015) mm

B axis Any angle 8 "

4 ×90 ° 4 "

Repeat fixed position precision X,Y,Z axis JB/T8771.4-1998 0.012(Closed loop 0.010) mm

B axis Any angle 5 "

4 ×90 ° 3 "

Every coordinate axis motor power X,Z axis 5.23 KW

Y axis 7.75 KW

B axis 4.87 KW

Every coordinate axis motor torque X,Z axis 25 N·m

Y axis 37 N·m

B axis 15.5 N·m

Hydraulic pimp station Pressure 10 Mpa

Flow 45 L/min

Volume 200 L

Air source Pressure 0.4-0.6 Mpa

Flow 500 L/min

Cooling pump Pressure 5 bar

Flow 50 L/min

Pump head 20 m

Lubricant pump Pressure 2 Mpa

Flow 150 ml/min

The main machine weight 32000 kg

Electric total capacity 90 KVA

The machine overall size 9322×5388×4000 mm

Using ground area 10000×6400 mm

The lathe standard configuration

NO. The main machine standard configuration

1 The main transmission system (including ac main motor, main axis box, main axis and etc.)

2 Double exchange table

3 X.Y.Z three axis driving system (including ac servo motor, coupling, ball bearing screw and etc.)

4 The main part (including lathe body, working table, vertical column, main axis box and etc.)

5 CNC system [including CNC cabinet, power module, servo module, PLC, operation unit, monitor, moving pluse generator, air-conditioner(electric control cabinet cooling machine) and etc.

6 Hydraulic system (including motor, pump, pressure control valve and etc.)

7 Pneumatic triplet

8 Automatic lubricant system (including motor, pump, distributor and etc.)

9 Cooling chip removing system (including motor, pump and chain type chip remover)

10 X.Y.Z axis guiding rail defense

11 Full-closed defense room

12 Adjustable shim and anchor screw

13 Random technical document 1.Machine using specification one set

2. Electric using specification one set

3. Qualified certificate of compliance

4. Container loading list one set

5.Maintenance accessories catalogue one set

6. SINUMERIK 802D sl operation programming handbook---milling machine one set. 7.SINUMERIK 802D sl diagnostic handbook one set

8.CF card

9.Data backup list disk one piece

10.Random tool list one set

11.Spare parts and quick-wear part list one set

B.Regards

Sophia

Anshan Ying Yat Trade CO., LTD.

AnShan HongMing Metallurgical Machinery Co., Ltd

Tel: 0086-412-8554528  
Fax: 0086-412-8562503
Email:asyingyi230 at