80mm low price thermal insulation nails

Specifications

80mm low price thermal insulation nails
1.material: steel,plastic
2.factory price
3.direce factory
4.ISO:9001

80mm low price thermal insulation nails 

Air Gong

 

Skype:microcosm-smile

 

 

This product adopt superb steel nail and A-grade PP injection molding. designing of the particular art skill and high quality plate make the insulation board easy to fixing. The solid plate can take great load-carring properties; this expanding insulation product has a strong bearing capacity, high compression resistant, great tensile strength, it can keep stable in the enviroment of -40°C to+80°C. and it can be used to fix the insulation board in the external insulation board. Moreover it can be used in all kind of wall materials, such as concrete, solid and hollow wall. this product has the features of accommodating climate, anti-shaking, resistance to weather, breakage resistance, fastness and enduring. the superb galvanized steel greatly solved the problem of corrosion, and enduring, moreover A-grade pp injection moulding have a low heat transfer. and it has not thermal bridge in winter and high efficient and energy saving.
Features
A-grade pp injection moulding plus superb steel nail
the tensile capacity of sigle insulation nail  0.8KN
value added of systematic heat transfer to single nail 0.004(m2. k)
carried standard: JG 158-2004
Specification
1. Locating: After the thermal board is pasted onto the wall, choose the fixing anchor position.
2. Drilling: Drill through the board, the hole depth must be according to the specified measure(Note: The hole depth in the wall should be over six cm)
3. Putting-in: Put the fixing plate around the put it into the against the board.
4. Knocking-in: With a hammer, knock the steel nail into tube(steel nail shall parallel to the thermal board)

Competitive Advantages

Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Customer's Design and Logo are Welcome ,
Competitive Prices ,
Fit for Gifts and Premiums ,
Earth-friendly Products ,
Small Order Acceptable ,
OEM Accepted

Sepcifications

model	bore  diameter	tolerance			insulation material thickness
		bore diameter	anchor eye depth	anchor eye  inside diameter
8*60	8mm	8.05-8.20	100mm	8.05±10%	25mm
8*80	8mm	8.05-8.20	120mm	8.05±10%	35-40mm
8*100	8mm	8.05-8.20	140mm	8.05±10%	55-60mm
8*120	8mm	8.05-8.20	160mm	8.05±10%	85-80mm
8*140	8mm	8.05-8.20	180mm	8.05±10%	90-95mm

 

Application

 

Insulation nail detail

 

Company information

 

Anping County Jingzhi Wire Mesh Products Co., Ltd. promise: abide by the contract, reasonable prices, and to ensure that the products sold directly to customers, never appeared deficit meters phenomenon, fair trade, the spirit of "people-oriented, quality for survival," the purpose, the "fine texture" brand bigger and stronger. Welcome customers to visit and guide, expand cooperation, mutual benefit and common development.

 

picturers of factory