sell plastic pipe fitting

Inner: Φ16mm

Outer S: 26mm

We are specializing in varity of injection Plastic pipe fitting.

1.Material:ABS.PP.PE.PVC.TPE,TPU

2.Size:different design is ok,hope to receive drawings or samples

3.Colour:any colour are receivability.

4.Package:High quality export carton   

5.Deliver time:normally,we can deliver with 15days.

1.Brief account of products

With economic development, living standard of people is improving continuously. It is rational for modern people to pursue better quality of life. One of criteria for high life quality is health. In order to improve life’s quality of people, State is making great efforts to improve quality of potable water and strictly prevent pollution on running water. However, since the basic material of pipeline for water supply and drainage is metal, such as copper, stainless steel, etc. it isdifficult to avoid the secondary pollution during long time use. Therefore, a green revolution is necessary for pipeline of supply and drainage of industrial and civil water.

To serve human health is a development goal of Sanly Plastic Pipe Fittings Plant of Ningbo City. In order to realize objective of “Green revolution”, the plant has formed a Hi-Tech professional team, and researched and developed a series of patent products – pipe fittings made by reinforced polyamide resin, i.e. nylon pipe fittings with Brand “Jinshen”. The main raw material is reinforced polyamide resin. It has a reinforced external side with an excellent sealing effect. The results of inspection and testing by State authoritative institutions indicate that the quality of products has reached a leading level in China compared with similar products. It is an optimal product for application with various new type pipes, such as aluminum-plastic pipes, PEX pipes and PVC pipes.

Nylon pipe fittings of Brand “Jinshen” are divided into 4 types, covering straight fittings, bending fittings, tee fittings and bottom sub. It includes more than 20 kinds of products with various diameters from 14 to 63 mm. The new products with big diameter such as 40, 50 and 63 mm especially attract attention of clients. At present, our company possesses 12 advanced production lines for injection moulding with annual capacity of 8 million sets. Our company has made great efforts to use high-tech in order to improve water quality. Being full of Ningbo Spirit of“Dedication and contribution to enterprise advancing” and following the Green revolution principles, the company will offer pipe fittings with more specifications, better quality and betterservice with an aim to challenge pipeline system and support pipeline construction all over the world..

2.Property and feature

(1)Tolerance to freezing and high temperature: its operational temperature -30°C - 150°C,

(2)High tolerance to vibration, with standard operational pressure more than 2.0 MPa,

(3)Corrosion resistance without fouling, its sanitary quality meets standard of GB/T17219-1998,

(4)Light and convenient for transportation,

(5)Easy, rapid, convenient and safe for installation, without process of tapping,

(6)The cost is lower by about 50% compared with that of copper pipe fittings with same quality,

(7)Can be directly used in industrial or civil pipeline engineering projects, including transportation pipeline for liquid and gas such as purified water, cool or hot water, solar energy, air conditioner, medical facility, food and chemical industry and so on,

(8)Basic material is reinforced polyamide resin, that has the best flexibility and solidity and long service life.

3.Principal technical indicators are shown as follows:

(1)Hygienic indicatormeets the standards of GB/T17219-1998 for potable water transportation and of safety evaluation of health protection,

(2)Appearance: inner and outer surface has qualified lubricity, evenness without any depressed position, flaw, and other defect, which may influence property, without visual impurity. Meanwhile the color should be uniform,

(3)Testing pressure: if D(diameter) ≤14 mm it is 7.0MPa,if D<16 mm-18 mm, it is 5.0MPa,If D  ≤18~25mm it is 4.0MPa,if D≥25mm, it is 2.4MPa. The test should last for 5 minutes, and no leakage or flaw is found during testing,

(4)Test of alternate change: After 10 times of cool-hot cycles, pressure is increased to 2.4 MPa, and kept to 10 minutes, without any leakage or flaw.

(5)Reliability: Under -10°C, it is kept during 1 hour. Then pressure is increased to 2.4 MPa, and kept for 10 minutes. Under 100°C, it is kept during 1 hour. Then pressure is increased to 2.4 MPa, and kept for 10 minutes. In both cases, noleakage or flaw is found.

(6)Reliability: Under 150°C and pressure 2.0MPa, it is kept during more than 200 hours. No leakage or flaw is found.

(7)Straining strength: Under normal circumstance, the product straining strength of radiation direction should be ≥2000N,≤5300N.