Honduras Animated Electroluminiscent Signage

Specifications: EL, or electroluminescent signage, is essentially a flat light bulb sandwich consisting of layers of conductive and non-conductive plastic and a layer of phosphor. The phosphor is laminated between two conductive layers and, as a voltage is applied between the two conductive layers, or electrodes, the phosphor emits light energy. When a high-quality, high-resolution image is printed over the light, it behaves like a backlit sign. Animation makes EL even more effective. By taking this idea further and dividing the printed image into several different sections that can be illuminated separately from one another, we can program and sequence these sections to provide an animated effect as we flash and/or fade the phosphor light in each of the sections in and out to create the impression of movement within a static printed image. The illuminated phosphor does not generate heat the way conventional light sources do so EL runs cool. You can encapsulate or enclose the panels without fear of them overheating or melting. Becase EL panels are self-contained, there is no light box required. So you don? T have to deal with heavy infrastructure to install an animated EL sign panel. There is only a small inverter box (power supply), which plugs in to normal 120 vac wall current. Panels can be hung without any special hardware. They can also be framed, or built-in to a custom fixture or display. The flexibility and thinness of the panels even allows them to be installed around columns. They work great in all areas where space is limited and costs are a consideration. We can produce animated EL sheets that are as small as a watch face or a bracelet. At present, our maximum finished sheet size is 3 feet by 6 feet. Sign material multi-laminate construction Sizes & shapes any shape up to 36 x 72 of animated area Custom shapes available Viewing angle better than 160 degrees Brightness min 100 CD. M2 Life 10,000 hours + (life is increased if sign is animated or cycled) Weight a typical display with size of 6 x 12 weights ~10 oz Safety no ultraviolet radiation emitted Indoor/outdoor can be operated in both environment Operating temp - 30c to + 70c Storage temp - 40c to + 85c Humidity range 5% to 95% humidity Opearting current maximum to 0.25 ma/cm2 Operating power low power consumption approx 5-10 watts - open sign Power resources DC 1.5v to 24v and or ac110/220v Power inverter different power configurations to optimize sign parameters Supply voltage ac60v to AC 220v Supply frequency 1.5khz sine wave at AC 100vrms Approvals solid state switching power supply (ul listed) Warranty 6 month factory warranty for EL signs, displays and inverters