ASTM A533GrACL1/CL2/CL3 Boiler Pressure Vessel Steel Plates

ASTM A533GrACL1/CL2/CL3 Boiler Pressure Vessel Steel Plates

1.Material: ASTM A533GrACL1/CL2/CL3,A533GrBCL1/CL2/CL3,A533GrCCL1/CL2/CL3,A533GrDCL1/CL2/CL3

2.Application Potential:ASTM A533GrACL1/CL2/CL3 manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for use in the quenched and tempered condition for the construction of welded  pressure vessels.

3.Relative Grades:A533GrBCL1, A533GrBCL2, A533GrBCL3, A533GrCCL1, A533GrCCL2,  A533GrCCL3,  A533GrDCL1, A533GrDCL2,  A533GrDCL3

4.Demension(T*W*L):6-150mm * 1500-4020mm * 3000-18000mm

5.Adopting standard: ASTM A533/A533M

6.Heat Treatment:ASTM A533GrACL1/CL2/CL3 plates shall be heat treated by heating to a suitable temperature within the range from 1550 to 1800°F [845 to 980°C], holding for a sufficient time to obtain uniform temperature throughout the plate thickness and then quenching, in water. Subsequently the plates shall be tempered at a suitable temperature to produce the specified properties, but not less than 1100°F [595°C] with a minimum holding time of 1/2 h/in. [1.2 min/mm] of thickness, but not less than 1/2 h.

6.Supplementary Requirements of A533GrACL1/CL2/CL3:
S1. Vacuum Treatment,
S2. Product Analysis,
S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons,
S4.2 Additional Tension Test,
S5. Charpy V-Notch Impact Test,
S6. Drop Weight Test (for Material 0.625 in. [16 mm] and over in Thickness),
S7. High-Temperature Tension Test,
S8. Ultrasonic Examination in accordance with Specification A 435/A 435M,
S9. Magnetic Particle Examination,
S11. Ultrasonic Examination in accordance with Specification A 577/A 577M,
S12. Ultrasonic Examination in accordance with Specification A 578/A 578M,
S17. Vacuum Carbon-Deoxidized Steel, and
S19. Restricted Chemical Requirements

Contact  person : Anna(Manager of overseas dept.)

office email: Anna(at)hzzsteel(dot)com(dot)cn
Gmail:anna860919(at)gmail(dot)com
MSN: anna860919(at)gmail(dot)com
Skype: hzzsteel3
MOB: