ZJX-0.2-2X1250 Hydraulic slitting machine or slitting line

Detailed Product Description

1.Hydraulic coil Car

²  The car can move levelly and vertically, which is convenient for putting the steel coils to the un-coiler.

²  It is driven vertically by hydraulic cylinder with 4 guide pillars.

2.Hydraulic de-coiler

²  Supporting steel rolls and uncoiling

²  Hydraulic pressure drives the level and landscape orientation movement

3.Slitting machine

²Drive system consists of drive stand, decelerator, 11KW frequency conversion control motor, the gear distribution box, coupler, connection shafts and cover.

²Main section is made up of base, fixed brackets, large slide block, 2 blade pivot(Φ150mm),movable brackets, slide block, etc.

²The main section adopts manually move out the brackets which is very convenient to change the blades

4.Scrap Winder

²It consists of base, the shaft and plate of edge material, friction wheel, supporting wheel chain, chain, decelerator and 1Kw electric machine.

5.Tension stand

²Consist of base ,pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device

6. Hydraulic recoiler

²Consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting 650 decelerator, 30KW frequency conversion control motor.

7. Hydraulic unload car

8. Electrical control system               

9. Hydraulic System