HJW series Helical Gear Reducer of heat power precision transmission system

Delivery Time:DEPENDS ON QUANTITY
Certification:CE,ISO9001:2008,ISO14001,GB28001

Quick Details

Gearing Arrangement: Dual drive transmission device

Ratio: up to 49295

Nominal output torque up to 40000Nm

Max output torque up to 100000Nm

Static load 120 KN

Dynamic Load 75KN

Place of Origin: Zhejiang, China (Mainland)

Brand Name: HENGTAI

Color: According to customer

Packing: Strong wooden cases for exporting

Description:

HJW series Helical Gear Reducer of heat power precision transmission system has their own proprietary intellectual property rights is derived by high

precision worm gear and worm. HJW series Helical Gear Reducer of heat power precision transmission system combined horizontal transmission and

pitching transmission in a gearbox, which adopts the drive principle of a high-precision gears and precision

rolling gears, to accomplish full 360 tracking and accurate location.

Your benefits:

1. Vertical and elevation transmission in the same housing with compact structure lead to high anti-

overturning moment, with self-locking capacity.

2. Special backlash adjust design no need disassemble main components but with simple wrench and

screw driver to adjust is OK.

3. Use high capacity lubricate no leakage.

Specification:

Ratio: up to 49295

Nominal output torque up to 40000Nm

Max output torque up to 100000Nm

Static load 120 KN

Dynamic Load 75KN

Applications:

Widely applied for energy, military industry, aerospace, industrial automation and other transmission

equipment industries, especially for solar thermal power generation and tracking system of heliostat, the

sun tracking system of photovoltaic panels, radar tracking system etc.

Maintenance:

After 300-hour operation, please change the oil, and flush the gear unit with suitable detergents.

Pls do not mix the mineral oil and synthetic oil.

Pls check the oil level in regular time.

The cause for breakdown and settlement of reducer:

Breakdown	Possible cause	The way of settlement
The motor does not run in case of loading	Voltage is too low	Check to see if the wire is too long or too thin
Gear is damaged	Repair it in special factory
Work with overload	Discharge load
Very hot	Work with overload	Discharge load
Start and stop too many	Discharge load
Bearing is damaged	Reduce using frequency
Voltage is too high or too low	Repair or replace
Loud noise	If the noise is loud and continuous, the bearing is damaged or the gear damaged	Repair it in special factory
If the noise is loud occasionally, the gear must be damaged or something else block	Contact with the service institution

                                Storage:

1:Pls do not store in outdoor.

2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly

touch the floor.

Warranty:

HFT guarantees the products sold for one year from the date of delivery. Warranty is limited to repair or

replacement, free at our plant, of defective parts due to an ascertained defect of material or manufacture.

The parts replaced remain our property. All other compensation is excluded, nor can any direct and/or

indirect damage be claimed of any nature, also for the temporary lack of use of the goods purchased.

 

Competitive A