Over Speed Alarm Mobile SIM 3G GPS Tracker Vehicle Tracking System

1.   Product Overview

G-T009 is a 3G GPS/GSM/GPRS/WCDMA based tracking device, specially developed and designed for vehicle real-time tracking and fleet management.

G-T009 has  inbuilt  GPS (SIRF Ⅲ )  and  GSM module  (SIMCOM 900)  to

obtain accurate position data. This device utilizes its GSM capability to send position data to mobile phone or server based vehicle  tracking and fleet management

Device have voice input/output port, customer can connect a microphone to

device and hidden it somewhere in the car for listening to the cabin; also can connect a louder speaker same time, to use the device as a telephone.

Features:

   GPRS TCP/UDP and SMS Communication

   A GPS (Optional)

   Track on Demand

   Track by Time Interval

   Upload when Direction Change

   GSM Blind A rea Memory

   SOS Panic Button

   Geo-fencing A larm

   Low Battery A larm

   Over Speed A larm

   Power-cut A larm

Engine Cut (Remote cut fuel / engine)

Temperature detect

Fuel consumption

Take picture

Fleet dispatching function(via SMS to send and receive command )

Support TTS

[Notes]

G-T009 is not with waterproof capacity; select the dry location to install   the   device,   also   pay   attention   to   moisture-proof   and waterproof.

G-T009  is based with WCDMA/GPRS/GSM and required SIM card supports GPRS data transfer function.

2. Functions

2.1 Real-time positioning

Monitoring center can directly locate the specified vehicle terminal call view,

in-car terminal will immediately return to the central monitoring platform details such  as  vehicle  location  data.  Location  information  mainly  include:  time, longitude, latitude, speed, location, location signs, vehicles and terminal status.

2.2 Report by timing interval

Monitoring center can specify the car back to the terminal for data transmission interval  timing  settings,  factory  default  upload  interval  of  30  seconds, adjustable range is 5-65535 seconds; if interval is set to less than “5 seconds \", the terminal device will automatically return to the \"5 seconds.\"

2.3 Mileage statistics

The beginning of this equipment from loading automatically calculate mileage, and mileage statistics from time to time to report to center platform, the center can take advice on car mileage table stored data; also the centers can clear the vehicle mileage data stored by platform, or be derived in accordance with set time-related mileage statistics. Mileage statistics < \"16000km\".

2.4 Stop Engine  (oil) / Recover Engine (oil)

Monitoring center can be personalized to the designated vehicle and a remote disconnect  the  circuit  or  to  restore  the  circuit,  when  the  vehicle  terminal receives  instruction  on  the  oil  line  or  restore  the  circuit  to  take  down  oil movements.

(Note: Equipment in the implementation of action off the oil when it is the first implementation of the three sub-batch 1 seconds off the oil  【off 15 seconds】

---- restored to the 4th when completely cut off oil line)

2.5  Over speed alarm

Traffic speed alarm refers to the device in accordance with the speed to allow the user to set the value of constantly monitoring the vehicle speed, when the vehicle speed exceeds preset allowable value, the device will send over speed alarm  data  reported  to  the  Center,  when  the  speed  dropped to  the  default values that the abolition of alarm. Center received alarm data may confirm or cancel the alarm. Driving speed alarm set value in the 0-255 (km) range.

2.6  Terminal main power cut alarm

When the vehicle power supply was cut off the terminal will issued a power off warning in 3 seconds, at the same time start the backup battery power supply

(can  last  around  4  hours),  again  automatically  detect  whether  the  alarm  is canceled after 30 seconds, Center received alarm  information  could confirm and cancel alarm.

Note: The brown-out detection voltage threshold value <7V (DC).

2.7  Restore to factory default

To  restore  factory  settings  is  to  clear  the  main  terminal  settings,  so  that terminal back to the original state. This feature will not clear the set of the IP, ID, A PN, time zone, standby mode.

Note: double check the communication parameters are correct before restore the