High - Speed Fully Automatic AC Power Cable Binding Machine

Delivery Time:20-25 working days after receiving advance payment
Certification:CE

High - Speed Fully Automatic AC Power Cable Binding Machine
 

Specifications

automatic plug cable/wire winding, can set up turn numbers, winding length, leaving header length. High efficiency

SD-168B Automatic Wire Twist Tie Machine                     

Feartures:

Tie and twist the cable automatic The head length, tail length and total winding length can be adjusted Easy to operation Labors are saved Improving output PLC control precise parameter fully english led touch screen

Parameter: 

Model of machine	SD-168B(DC)
Winding Speed	1,500~1,700pcs/hour
Total winding length	60mm~120mm
Lenth of the wire	Max. 400mm
Normal head length	30mm~150mm
Normal tail length	30~350mm
Number of turns for tie	can be adjusted
Votalge	AC220/50HZ
Pressure of air source	0.5~0.8MPa
Dimension	1,100mm*660mm*1,550
Weight	235KG

Model of machine	SD-168B(AC)
Winding Speed	1,200~1,500pcs/hour
Total winding length	120mm~220mm
Lenth of the wire	Max. 400mm
Normal head length	30mm~100mm
Normal tail length	30~350mm
Number of turns for tie	can be adjusted
Votalge	AC220/50HZ
Pressure of air source	0.5~0.8MPa
Dimension	1,300mm*660mm*1,550
Weight	235KG

 PRE-OPERATION PREPARATION

 
1, Add appropriate lubricating oil to each oil feeding part
2, Whether the air pressure exceeds 4.5KG/cm2
3, Whether the wire reel is in proper position
4, after the machine is started, see if the motor or other mechanical components sound abnormally
 

Operation Steps:
 
1, placement of wire: place the plug end of the wire into the wire reel locating block and press starting switch to enable the wire to be processed in each link by attaching to the winding rod until the wire binding is completed

2, adjustment of the wire length: loose the adjusting holder and adjust the wire to the desired length to the left and right, and then tighten the screw

3, Adjustment of wire allowance at the other end: loose the air cylinder base to enable the cylinder to stretch out, and then move the air cylinder base to get the desired length of the wire at the other end, and then tighten the screw.

Product Show:

Finished Product Show: