Decoration Punched Perforated Metal Sheet 1mm - 45mm Thincness

Corrosion Resisting Perforated Metal Sheet For Gasoline / Freshwater Tanks

Monel NO4400 alloy Sheet (plate strip) is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, Monel 400 Sheet (plate strip) exhibits characteristic like high strength.
 

Description: Monel NO4400 Sheet (plate strip) has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters. This mesh\'s good resistance to a variety of corrosive conditions contributes to the wide application in marine and other non-oxidizing chloride solutions.Monel NO4400 Sheet (plate strip) is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. However, its high copper content, make alloy 400 can be rapidly attacked by nitric acid and ammonia systems.

 

Applications:

Marine engineering
Chemical and hydrocarbon processing equipment
Gasoline and freshwater tanks
Crude petroleum stills
De-aerating heaters
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings, and fasteners
Industrial heat exchangers
Chlorinated solvents
Crude oil distillation towers
Can also be used to manufacture all kinds of heat exchange equipment, the boiler feed water heater, all kinds of pressure vessel equipment oil and chemical pipe line, containers, tower, groove, valves, pumps, the reaction kettle, shaft ,etc
 

Specifications:

1.Sheet: thickness:1mm-45mm width:600mm*length:1500mm

2.Standard: ASTM B 564 (forged),ASTM B 127(plate,strip)

3. Chemical composition

4, Specification and manufacture ability

Competitive Advantage:

1. Resistant to seawater and steam at high temperatures
2. Excellent resistance to rapidly flowing brackish water or seawater
3. Excellent resistance to stress corrosion cracking in most freshwaters
4. Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
5. Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
6. Excellent resistance to neutral and alkaline salt
7. Resistance to chloride induced stress corrosion cracking
8. Good mechanical properties from sub-zero temperatures up to 1020° F
9. High resistance to alkalis