Colored Galvanized Steel Sheet Metal Roll Forming Machines 4 KW

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Colored Galvanized Steel Sheet Metal Roll Forming Machines 4 KW

Introduction of  rib lath mesh machine

Angle protecting mesh was shaped through exoabsuib and stretch the two wings the

galvanized steel and stainless steel. Its wings can union with lime mud reliably it can

shape the smooth, straight, simple angle in the buildings. Meanwhile it can prevent the

angle from disruption, hit, destroy, be widely used I construction, decoration, it has the

effect of protection, easy to take shape and beautiful.

Main technical parameters of  rib lath mesh machine

Inner diameter: 350 Outer diameter: 700 Material width: 485-500MM Material thickness: 0.45mm galvanized steel Loading weight: 2000kg Servo motor: 1.5KW Working speed: 450—500 strokes/minute or 10—20M/Minute Punching Motor power: 5.5kw Driven way: Chain and gear Rolling passage: 7+2 Rolling thickness 0.45mm Forming Motor power 5.5kw Profiling mold: 45 Steel Hydraulic cut: 7MPA 40L Tank Lubricate: Center control Control method: PLC Electric element: Shneider Machine size: 1120 X 600 X 1500 mm Weight: 5300 KG Installation size: 12570 x 2900x1500 m

Material of Main Equipment  

Roller Material	High grade No.45 forged steel, coated with hard chrome.
Active Shaft Material	High grade No.45 carbon wrought steel, which can improve the integrated mechanic feature of the shaft.
Electric Elements	PLC control panel, transducer imported from Mitsubishi of Japan. Other elements are from famous suppliers of China.
Cutter blades	Cr12 mould steel with quenched treatment.

Components and Function

Coil Feeding Equipment        Consists of one uncoiler with capacity of 3000kgs and its base. The mandrel can expand or shrink. With separate button to make the mandrel roll.

Guiding Equipment               Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.

 Roll forming system             The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers with quenched treatment after being machined by the exact machining tool.

 Hydraulic Station                  Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.

 PLC Control Panel                 Main parts imported from Mitsubishi. The operation is easy and steady and can be choose operation by manual or automatically.

Introduction of  Rib Lath Shearing Roll Forming Machine

The machine is full-automatically controlled by PLC, the whole hydraulic transmission, drive hydraulic oil jar carry out and shear through center pump station towards the hole, hydraulic pressure Motortransmit power as main transmission. it\' s reliable to operate steadily by hydraulic pressure, shear towards hole precision geometry form rule of the notch. Its hydraulic pressure transmission,to set correct and fit.

The cold roll forming machine can produce many types of Roof tiles, wall panels, frame profiles, rib lath.The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment , pre-cutting equipment, C-shape forming system, hydraulic station, and PLC controlling system