Automatic Pipe Welding Tank Turning Rolls Rotators for Pipe Butt Position Adjustment

Automatic Pipe Welding Tank Turning Rolls Rotators for Pipe Butt Position Adjustment

Description

1. This customer want to weld some single pipe weld together, but during the butt welding, two single pipe often can not butt well. We our fit up model welding rotators will adjust the butt position up / down to make two single pipe butt well for auto circle welding.

2. After weld two single pipe together, the rotator will motorized moving on the rail for the third single pipe

load and butt with the before one.

Attention

1. If your single pipe length more then 8M , then you should use 1 powered with 2 idlers to support.

2. All our pipe welding rotators have 20% over weight design, but we suggest used on the safety rangs.

3. We have strong delivery team, including the Sea freight and Air transportation. Door to door available.

4. Just advise me your desitination port then we will give you the final CIF price.

Supply Ranges

1. Consist : One powered roller , One idler roller , Electric control system

2. Adjust way : Adjust the pipe diameter automatically with diameter 40 - 200 inches

3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available

4. Control Way : Remote hand control box / Wireless hand control box

5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for Nonferrous Metals )

6. Original : Our factory / Wuxi China

Specification

Applications

More Questions Customers May Concerned

Q : What about the transportion?

A : 1. Fully packaged in wooden case to anti damage during the transportational process .

     2. Usually we take seaway ,cause its more convenient and cheaper for big machine.

     3. Door to door delivery service is also available.

Q : What is your warranty and after sale service ?

A : 1. All our equipments with One Year Warranty time , fully test at our work shop before delivery.

     2. If you have any questions on the installation , you will get our engineers respond within 24 hours.

Details Control system and Brand

1. Inverter is from Taida / Yaskawa Brand

2. Motor is from CE Invertek Brand

3. Reducer is from Cable. Made in China.

4. Electric system is from Schneider

Our suggestion

1. Normally under 60 T model we use the Rubber material rollers , upper we use Steel material rollers. 
2. If your work piece material is Nonferrous Metals , we suggest PU rollers.
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw adjustment / Fit up rotators all available.
 

DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.