EPS sandwich wall panel

Product Introduction:

Polystyrene Sandwich Panel also called EPS Sandwich Panel, the up & down surface of this panel is Galvanized & Pre-painted steel sheets, core material is 5 components Polyurethane glue, it is formed by heating, foaming & laminating.

Polystyrene is the best material for temperature keeping and sound insulation.

It is widely used as the wall or roof for cold storage, industrial workshop, public building etc.

Products Assembly

The panels are laid on metal bearing structures. They are fixed using fastener screws. The panels come supplied with a single coated sealing strip made of white polyethylene foam which should be laid longitudinally between the panels so as to obtain a damp proof unit, thereby precluding any risk of condensation. All flashings can be had in the same color as the panels.

The panels are supplied, as standard, with a right-handed longitudinal overlap and a foamless end lap of 50mm.it is possible to order the panels with a larger, end lap. The panel length and the insulating length must be specified in that case

Fixing of roofing panel

The panels are to be fixed at the top and bottom of each corrugation. Don’t skip more than 1 corrugation at the intermediate structural rails.try to fasten these lock rails in a staggered pattern. Particular attention, in the case of the sandwich panels, must be paid to the damp proof butt-ending of panels so as to preclude the risk of condensation to form a hermetic seal, the sandwich panels have a wedge of polyethylene foam running in the longitudinal direction. The panels should be pressed firmly against one another. It’s advisable to apply some sealing tape to all connections on the sides, roof ridges,cross-joint,on interior gutters,etc.

Basic information of EPS sandwich wall panel: