Home > Products > Spray Drying Machine > Microencapsulation Spray Drying Machine in pharmaceutical industry Electricity + steam Heat supply
Microencapsulation Spray Drying Machine in pharmaceutical industry Electricity + steam Heat supply
- 0 Set / Sets per Month
- T/T L/C D/P D/A
- 7 days
-
Powder Feeding pharma Spray Drying Machine with centrifugal atomizer 25000rpm
-
25rpm rotating speed Dry Powder Mixer industrial mixing machines BV Standard
-
Tablet granulation high speed mixers industrial , pharmaceutical mixing equipment 10 kg
-
Powder material pelleting Fluid Bed Granulator 1200mm container Dia
-
Four bed top spray granulating Multifunction wet granulation equipment 3 - 15 capacity
-
Vertical granulator high shear lab mixer High eficiency 800 450 900 150kg
Product Details
| Brand Name: | Haijiang | Place of Origin: | China | Model Number: | LPG-200 |
Product Description
Certification:CE/GMP/BV/ISO9001
LPG Series High Speed Centrifugal Spray Drying Machine equip with the high speed centrifugal atomizer
LPG-200 high speed centrifugal spray drier
Description:
Spray drying is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as:solution, emulsion, suspension and pumpable paste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
Principle:
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
Features:
The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials.
Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality.
The producition procedures are simple and the operation and control are easy.The liquid with moisture contents of 40-60%(for special materials,the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and managment.
Technical Parameters:
| itemparameterspec | LPG | |||||
| 5 | 25 | 50 | 100 | 150 | 200-2000 | |
| inlet temperature ℃ | 140-350 automatically controlled | |||||
| outlet temerature ℃ | ~80-90 | |||||
| Max.water evaporation capacity | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| centrifugal spraying nozzle transmission mode | compressed air transmission | Mechanical transmission | ||||
| Rotation speed rpm | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| sprayingdesc diameter mm | 50 | 100 | 120 | 140 | 150 | 180-340 |
| Heat supply | Electricity | Electricity+steam | Electricity+steam,fuel oil and gas | Settled by users themselves | ||
| Max.Electric heating power kw | 9 | 36 | 63 | 81 | 99 | |
| overall dimensions m | 1.8×0.93 ×2.2 |
3×2.7 ×4.26 |
3.7×3.2 ×5.1 |
4.6×4.2 ×6 |
5.5×4.5 ×7 |
Depends on the concrete conditions |
| Dried powder restoring tate % | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
| Note:For the water evaporation capacity, material property,the inlet and outlet tempratures,please refer the following diagram for reference. | ||||||
Overall dimension:
