T3 Cfl Led Bulbs For Hotel / Room , 11W Fluorescent Bulb Soldering Type

3U 11W T3 Compact Fluorescent Lamps Color Rendering Index > 80 Ra Good Lumen Efficacy

Description

1 . Turn on – off time is more than 12 000 times .

2 . No mercury vapor , using solid mecury technology , Hg < 3mg .

3 . Using PBT plastic cover , PBT have two advantage : ① Inflaming retarding ② High temperature resistance .

4 . Using nickleplated aluminum base , very good to avoid getting rusted .

5 . For the pack , we have color box , single blister , double blister .

6 . The key components is the electrolytic capacitor and transister , we are choosing GRP or AISHI for our electrolytic capacitor and choosing HUAJING as our transister .

Lamp parameters

Features

1 . Power : 11W

2 . P.F. : > 0.5

3 . Power consumption: < 10%

4 . Lead free glass tube

5 . Compact type , integrate the ballast in the lamp

6 . 100% triphosphor A - grade powder

      1 ) Luminous efficency: > 60 lm / w

      2 ) Brightness maintance: > 80% after 2000H

      3 ) CRI : > 80 Ra

      4 ) SDCM : < 5

Competitive advantage

1 . Strict raw materials inspection .

2 . Technical parameter adjustment :

     1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

     2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

     3 ) Turn on off test , to make sure the life time of the lamp

     4 ) Start test in low temperature and low voltage ( light in the fridge )

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

Application

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .

Quality Control ( QC )

1 . We have 4 QCs to check the raw Materials , such as tube , Transister , Electrolytic . capacitor , inductor , resister , diode , magnet ring , capacitor , PCB board , plastic cover .

2 . Before the mass production , our Technicians will tune the technical parameters of each items to make sure the Wattage , P.F. living up to the requirement of customer,and also will do the High temperature and high voltage test ( llight it in the oven ) , doing the destructive test , and also will do the turn on off test , to make sure the life time of the lamp , also do the start tets in low temperature and low voltage ( light in the fridge ) .

3 . In the mass production , our QC will take selective examination on every step , such as Plug - in , Wave soldering , PCB test , Tube glue , Assembly