Vacuum Insulation Panels (VIPs)

GOOT Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation
material which was developed in 2006.
The VIP's are constructed using a special technique by inserting the open-celled
filler into a centralized sealed barrier.
Using the core material which provides the structural strength and resistance for
heat transfer makes the VIP extremely efficient in low thermal conductivity that
has less than 0.004w/m.k.

The VIP has been proven to exceed its performance than the conventional insulations
by far. Vacuum Insulation panels are our new high- efficient thermal insulation.
It is created by inserting the open celled filler into a centralized sealed
barrier. The core material provides the structural strength and resistance to heat
transfer.

Applications:
Cold insulated equipments of different industries
Shipping containers
Spaceflight/aviation
Communication/transportation
Medical refrigerators and freezers
Marine and recreational refrigeration vehicles
Civil refrigeration equipment
Insulation for construction

Advantages:
7-10 times better insulation value then conventional insulations
Thin wall, small volume, lightweight
Extremely low thermal conductivity 0.005w/m.k
Resistance to heat transfer among the gas molecules
Non-ODS material
Not harmful for the environment
Meets all insulating requirements

Specifications:

1) Compressive Strength: 0.14MPa - 0.25MPa
2) Thickness: 10 - 35mm
3) Maximum dimensions: 1,600 x 700 x 35mm
4) Core material: superfine fibreglass
5) Thermal conductivity: less than 4mw/m.k (under standard environmental condition:
ambient temperature 24°C, relative humidity 50%)
6) Density: about 230kg/cbm
7) Internal pressure: 0.1Pa
8) Operating ambient: -50 ~70°C
9) External tolerance of VIP: 1mm
10) Packing: carton with foam and air bubble film
11) Service life: 10-15 years under standard environmental condition