AISI-1541 of ASTM A519 for Seamless Carbon and Alloy Steel Mechanical Tubing

Specification Details:

1) 1541 Chemical Component Analysis(%):
      C: 0.36-0.44;  Mn: 1.35-1.65;   P:<0.040;  S: <0.050;

2) Monthly Capacity: 6000 tons.

3) Delivery Condition: BKS condition, Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR),

Quenched and Tempered(Q+T), etc;

4) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation,

phosphating,etc; Or Oil-dip paint black with two plastic caps on each end

5)  Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)

6) Relevant Test: ASTM A519-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield

strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior

Size Inspection, Nondestructive electric Test,Hydrostatic Test,  magnetic particle testing;

7) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's

requirement;

8)  Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with

several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires;

9) Packing Type: Round , Square, Rectangle, Hexagon.  Streamline, etc;

10) Applications: Automobile and Bearing Industry, Drill or oil industry, Mechanical and Structral Purpose, Hydraulic and

Petrochemical Purpose, etc.

11) Place of orgin: China

Mobile: +86 138 128 775 59 -->Terry(Chief Business Executive Officer)
Email: tubesolution@sina.com
 

Commercial Information:
  1) Delicery time: (45-60) days ready at mil also according to the actual weightl ; 
  2) Minium order : 15 Ton while no stock raw material;
  3) Term of payment     :  T/T or  irrepealable L/C at sight;
  4) Offer Validity              :  5-7 Days        ;
  5) Container                   :  20GP or 40GP or Bulk ;
  6) Manufacture methods  :  Cold Finished method or hot finished Method.