Acetic Silicone Sealant&Acrylic Sealant&Silicone Adhesive&Waterproof Sealant

It is one-part E5000 high-grade acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding.

Where to use

Widely used for Glass/Glass  joints, new and remedial glazing, sealing of aquaria/joints,pointing of window frames and ceramic tilling, sanitary fitting and built-in kitchens and so on

Safety precaution

Wash hands after use.

Preparation

Surfaces must be clean, dry and free of frost, grease, dust and other contaminants. To obtain maximum adhesion, surfaces should be flat to provide adequate contact. Painted surfaces must be well cured and free of loose paint. Sand glossy surfaces to a dull finish. Pre-fit all materials before applying adhesive. Cut the tip off the cartridge and screw the nozzle, then apply with silicone gun.

Application

Apply sealant with steady pressure, forcing the sealant into the joint. Smooth bead immediately with a wet finger or a tool. Remove masking tape immediately after tooling and wipe excess off of hands and tools. Sealant is paintable within 2 hours depending on temperature and humidity. Allow at least 24 hours before exposing to water. Periodically clean cured sealant with non-abrasive cleaner for best appearance. Note: The clear product will extrude white and will turn clear as it dries.

Effect

Strong adhesive property to all kinds glass and most construction material, after applying, it can bond the parts very strong, and it is weatherproof, waterproof in some extent.