1.75mm empty plastic spool resin POM 3d printer filament extruder machine for 3d printing

 
3D printer has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.

Size:1.75mm/3mm

Color: white, black,red, blue ,green , yellow, orange, purple, pink, grey, brown etc

           can accept custom

Sample time:3-4days

On Time Delivery:15-25days,

                            we also try our best to control the production schedule efficiently to meet your shipment date.

Comptetive Prices: we try our best to give you profitable price

PLA filament to 3D printer

GT PLA Filament is a kind of Biological based PLA printing consumables especially designed and developed on the basis of 3D printer.

PLA is the ideal material for a Mendel RepRap. It is dimensionally stable, so there is no need for a heated bed. It is relatively inexpensive, and is not hard ABS), easily to shape the 3D model.

It does require some torque to move PLA through an extruder because of its higher coefficient of friction (relative to ABS), so it is recommended that you use a Geared_NEMA17_Extruder or Geared_NEMA17_Extruder_Driver vs the stock mendel extruder.

Build Surface

PLA bonds very firmly to Acrylic, and it is not recommended to print directly on an Acrylic build surface.
It does stick well and is removed easily from BlueTape

It can also be printed on Polyimide(Kapton) that is pre-heated, but will be hard to remove until both the part and the surface are cooled.

It can also be printed directly onto heated glass

PLA prints nicely directly to a lightly oiled sheet of polycarbonate/Lexan. No heat is necessary.

Moisture Issues

PLA can absorb moisture from the air. When it is heated this moisture can turn to steam bubbles Small amounts of PLA filament can have some moisture removed by putting it on a piece of aluminum foil in an oven heated to 170F for an hour. The filament in the oven is floppy, but sticks to itself only slightly. Flexing the coils after cooling unsticks them from each other. Heating a whole spool this way has not been tried, and may result in the spool becoming unusable, so caution is advised.

Interestingly, a weight change can be seen after baking. One coil went from 120.5 grams to 120.0 grams (almost 1/2%).

 
 
Our Advantage: 
 
premier grade PLA material,

low water absorption,

high tough.

Factory direct sales, inexpensive.

buy more, bigger discount! ! 
 
Production Quality Control :

We have professional QC staff and production team that is responsible for quality.

Operate Mode:

OEM&ODM order is welcome!

Please don't hesitate to tell me if you have any question, we will try our best to meet your need!

Our Procedure:

Making quotation=>sending samples=>(Making revised samples or salesman samples)=>

Getting order=>production=>Inspection=>shipping goods

Trading Mode:

Ex factory, FOB,CF,CIF,DDP all are workable.     

Packing Info:

Inner packing: one piece in one suitable eco-friendly PE polybag.

Outside Packing: 8 rolls/CTN,Mean:36*36*26cm,GW:11.5KG

Shipping Mode:

We are able to deliver goods to customers appointed port or warehouse or office by boat or by air and even by courier according to customers. We have door-to-door service and door-to-station service.