Heat Transfer Vinyl Film Cut By Cutting Plotter DIY T-shirts

  1. Color pure and variety

 2. Resistance to wash, no drop powder, all kinds of washing

 3. Resist Ultraviolet radiation and sun, never fading

 4. The material of film is used in environmental protection material, no damage and discomfort to skin for long      time

 5. It can be heat transfer over print, make (especially T-shirt) design more rich and personality

 6. Cutting by machine or hand is all ok, heat transfer machine and iron is no problem for printing

  1. Make target design by computers. Switch on the cutting plotter and better try the pressure of tool in the  first step:After cutting, the color layer as well as one layer of base paper can be easily removed at the same  time.

 2. The tool should just cut half thickness of the base paper.

 3. Set the speed according to the size of the design. For example, set the speed faster (at 50-75) for a large

 design, and at 25definitely for a small one. Pressure is about 150g.Lowerspeed cutting is very important!

 4. You also can cut the design on PU vinyl By graver

 5. Peel off the unwanted color layer part when finish cutting.

 6. The design on base paper should be complete without any deletion. If you peel the wanted parts ,you can

 press it back then continue.

 7. Press by heat press, Set the temperature at 150℃-175℃(310F-350F) and the time at 10s -15s. The  temperature & time is not absolute, You should adjust on actual status.

 8. Cool peel the base paper.

 9. A wanted design will be on your unique T-shirt completely.