Contact Platform Support
Help CenterPET Single Stage Stretch Blow Moulding Machine Machine/Stretch Blow Moulding/Plastic Bottle Making Machine With Factory Price
Related Products
-
Plastic Recycling Line Used for Plastic Pet Bottle Scrap Making MachineUS$ 1,000 - 12,000MOQ: 1 Set -
Semi Automatic PET Bottle Blowing Machine/ Pet Bottle Blowing Machine for 500mlUS$ 1,000 - 12,000MOQ: 1 Set
-
New Condition and Stretch Blow Moulding Blow Moulding Type Oil Bottle Blow Moulding Machine , 5L Plastic Bottle Blowing MachineUS$ 1,000 - 12,000MOQ: 1 Set
-
Fully Automatic PET Bottle Blowing Machine Price/blow Moulding Machine 2 Cavities 2000bphUS$ 1,000 - 12,000MOQ: 1 Set
-
Automatic Plastic Bottle Making Machine/plastic Bottle Making Machine Used/plastic Bottle Making Machine Low PriceUS$ 1,000 - 12,000MOQ: 1 Set
PET single stage stretch blow moulding machine machine/Stretch Blow Moulding/Plastic Bottle Making Machine with factory price
Suitable for manufacturing a variety of PET bottles:
mineral water bottles, edible oil bottles, soda bottles, medicine bottle, cosmetics bottles etc..Description
Specification:
semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from
50~2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3.The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4.The machine can be operated in the step-by-step mode and the
semi-auto mode.
5.The machine is small with low investment, easy and safe to operate .
Model | MN-3L (One Blower & One Heater) |
Clamping Force | 100KN |
Clamping Stroke | 160 MM |
Max. Stretching Stroke | 360MM |
Number of Cavities | 2 Cavity |
Theoretical Output | 900 BPH(500ml) |
Max. Mold Thickness | 300MM |
Voltage Standard | 380v/3PH/50Hz or special order |
Number of Heating Zone | 4 Sections |
Total Power (Full Loaded) | 10KW |
Max. Container Volume | 2L |
Neck Diameter Range | 18-120mm |
Max. Container Diameter | 360mm |
Max. Container Height | 380mm |
Low Air compressor | 10Bar |
High Air compressor | 30-40Bar |
Blow molding machine | 1450*600*1700mm |
Preform Heater | 1800*700*1400mm |
Net Weight | 850kgs |
Blowing mold
Send Inquiry to This Supplier
You May Also Like
-
Commercial Restaurant Cube Ice Making Machine/Dry Ice MachineUS$ 1,000 - 30,000MOQ: 1 Set
-
Full Automatic Water Plastic Pet Bottle Stretch Blow Molding Machine Price for Blow Molds for Blow MoldsUS$ 1,000 - 12,000MOQ: 1 Set
-
PET Bottle Blowing Machine/pet Bottle Blowing Machine Price/used Pet Bottle Blowing Machine for SaleUS$ 1,000 - 12,000MOQ: 1 Set
-
2016 Hot Sale!dry Ice Block/slices/solid Co2 Making MachineUS$ 1,000 - 30,000MOQ: 1 Set
-
Hot Sale High Quality Dry Ice Cleaning Machine IndustrialUS$ 1,000 - 40,000MOQ: 1 Set
-
Hot !concrete Nail/concrete Nail Guns/concrete Nail Making MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
Automatic Office Wire Staple Pin Corrosion-resistant Nail Making MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
High Speed Automatic Screw Coil Nail Making Machine/Automatic Wire Nail Making Machine/wire Nail Making MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
Screw Making Machine Price, Automatic Thread Rolling Machine, Screw Nail MachineUS$ 3,000 - 50,000MOQ: 1 Set
-
Waste Can Iron Aluminum Separating Machine/cap Separator /automatic Can SlitterUS$ 3,000 - 5,500MOQ: 1 Set
