Under armour wholesale with multi cores from experienced cables manufacturer

500mm2 power cable  by experienced manufactor in China,xlpe power cable

Product Description                                                                             

0.6/1KV single copper core 120mm xlpe insulated electric cable

 Introduction:

Cross-linked polyethylene insulated power cable not only has excellent electric,mechanical properties,

but also has powerful resistance againest chemical corrosion,heataging and environmental stress.

Its structure is simple,too.

Our XLPE cable can be produced according to our Factory's specification which is equivalent to IEC60502.We can design and manufacture special XLPE cable according to the other standards,required by the customers. 

Construction:

 Number of cores: 1 .2.3.4.5,3+1,3+2,4+1 cores

Relative manufacturing standards: IEC60505, BS, DIN.

Packing: Wooden drum, steel wooden drum or as your request

Power Cable (structure)

-Conductor:
Solid or stranded copper or aluminum

-Insulation:
Cross-linked polyethylene( XLPE or PVC)

-Circuit Identification:
The insulation shall be red, black

-Filler:
Polypropylene lament with lapped binding tape

-Inner Sheath:
Polyvinyl chloride (Black)

-Core-covering:
Binding tape

-Outer Sheath:
Polyvinyl chloride (Black)

-Application: for laying indoor,tunnel,canal and underground.

Using features

1. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long term is no more than 5 seconds). The highest temperature for conductor is no more than 250 degrees.

2 . D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.

3 . The environment temperature should be no lower than 0 when lay. Otherwise it should be preheate d.

4.The cable is laid without horizontal drop limit. The Min. Bending radius of three core cable should

 be no smaller than 12 times of cable outer diameter.

5.. Working Frequency Voltage Test:.

For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture.

6 . Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

 Details Show                                                                                         

   Shipping & Packaging                                                                      

  Company Introduction                                                                      

HeBei huatong wires&cables Group Co.,ltd.It was established in 1993, we are JV with Furukawa(Japanese

company) for rubber serious cables and JV with Riken(Japanese company) for elevator cables. Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC powercables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We areOEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

 Certification                                                                                         

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. At thte same time, we have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,KEMA, TUV, Bureau Veritas, Lloyd,IEC,GL,SA,NK,KR certificates. 

  FAQ                                                                                                     

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please

call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight

charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7

days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express 

account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is

delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months

before the date you would like to get the products at your country.