Fava Beans Frying Line Machinery

The automatic belt conveyor system of the fava beans continuous frying line can drag food through the oil tank, can complete the processing and cooking of the food, and can arbitrarily adjust and control the frying time.
The oil should be kept clean during frying. If the water in the oil is not cleaned, bubbles and pans will appear during frying; there are many ways to control and adjust the oil temperature: when the oil temperature is high, the temperature should be reduced to control the fire source , Continuous frying line manufacturers, add cold oil, or increase the amount of raw embryo input.
After the heating tube of the continuous frying line is used for a period of time, some debris will appear on the surface, and it should be cleaned in time. The surface of the fryer should also be cleaned frequently. Otherwise, excessive accumulation of residue may easily cause high temperature or fire. Continuous Before the fryer is energized, oil must be added to the furnace to prevent the electric heating tube from being burned out.
Continuous fryer adopts advanced oil-water separation technology to eliminate the disadvantages of oil consumption and bad oil of traditional fryer.
Operation sequence of frying machine production line equipment:
　　 1. Cleaning: cleaning hard objects and residues in the pan and pipeline of the fryer production line.
　　 2. Trial operation: turn on the slag scraping belt, upper and lower mesh belts, lifting, exhaust fan and circulating pump in sequence, observe the equipment running direction, whether it is stuck and whether there is liquid leakage.
　　 3. Refueling: Before refueling, completely clean the water and hard residues in the pot body and the pipeline. Add oil to cover 30-50mm above the mesh belt (add edible oil according to the actual situation of the fried product).
　　 4. Heating: Ensure the oil level to cover the lower mesh belt before heating.
　　 5. Operation: switch on or off the heating control for heating, and set the frying temperature as required. When it reaches the set temperature, it can be fried.
　　 6. Turn on the exhaust fan, slag scraper belt, upper and lower mesh belt and circulation pump in turn.
　　 7. Check the pipes and valves, and open the circulation pump.