Jiangsu Acrel Electrical Manufacturing CO.,LTD: China Manufacturer with main products:power sensor ,programmable power meter ,DC power analyzer ,Data center monitor device ,Din rail energy meter ,Isolated power supply ,wireless temperature sensor ,IOT energy meter ,split core current transformer

Home > Products > Current Transformer > Acrel AHKC-BS uninterruptible power supplies 5V/4V output hall sensor split core current transmitter

Acrel AHKC-BS uninterruptible power supplies 5V/4V output hall sensor split core current transmitter

Name: Acrel AHKC-BS uninterruptible power supplies 5V/4V output hall sensor split core current transmitter
Brand: Acrel
Availability: InStock

FOB Price

USD $7 - $7 / Piece

1 Piece(Min.Order)

Supply Ability 1000 Piece / Pieces per Month
Payment Terms:T/T Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price

Product Details

Brand Name:

Acrel

Place of Origin:

Jiangsu, China

Model Number:

AHKC-BS

Product Description

AHKC-BS Hall Sensor

Measurement
- AC, DC, pulse and other complex current

Appearance
- Small package size
- Low power consumption
- Extended measuring range

Input			0-50-500A
Output			5V/4V
Power supply			±15V
Accuracy			1 class

Attention: 1. When the hall sensor is used, in order to obtain better dynamic characteristics and sensitivity, attention must be paid to the coupling between the primary side coil and the secondary side coil. It is recommended to use a single wire and the wire completely fills the hall sensor module wire hole;

2. When the hall sensor is used, the best measurement accuracy can be obtained under the rated input current value. When the measured current is far lower than the rated current To obtain the best accuracy, multiple turns can be used for the primary side, i.e. IPNP = rated ampere turns. In addition, the temperature of the primary side feeder shall not exceed 80 ℃;

3. The auxiliary power supply of Hall current sensor shall not exceed ± 20% of the calibrated value when it works normally; 4. Hall current sensor shall not fall from a high place (≥ 1m) during installation and use; 5. It is unable to adjust the zero point and full degree adjustment potentiometer; 6. Auxiliary power supply needs to be configured by itself; 7. The positive and negative poles of the power supply cannot be reversed.

Contact Us

Jiangsu Acrel Electrical Manufacturing CO.,LTD: Contact nameTim
Chat Now; Phone86-1870-6168051; AddressJiangyin Wuxi,Jiangsu

*Email
Please enter Your valid email address.
*To

Tim
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Multifunction Power Meter	Data Centre Monitoring	Temperature Monitoring	Smart Temperature And Hunidity Controller
Remote Terminal Unit	DIN Rail Energy Meter	IOT Wireless Energy Meter	PV/Solar Inverter Energy Meter
EV Charging Meter	DC Power Meter	Prepaid Energy Meter	Current Transformer
Hall Sensor	Protection Relay For Medium-Voltage Applications	Smart Motor Protector	Earth Leakage Relay
IT Power Distribution	Active Power Filter	Smart gateway	Ungrouped
Single phase din rail energy meter	Battery Monitoring device

New Products

Acrel AHKC-BS uninterruptible power supplies 5V/4V output hall sensor split core current transmitter

Product Details

Product Description

Contact Us

Popular Searches

Recommended Products

Find Similar Products By Category