Separation of Asphalt into Four Fractions And C7 Insoluble Matter Membrane Filtration Analysis Meter

Separation of Asphalt into Four Fractions And C7 Insoluble 

Matter (Membrane Filtration) Analysis Meter 

 Product model: JF0509

Product Introduction

This instrument is suitable for petroleum products and samples whose temperature is lower than 80℃ and can flow. It is also suitable for the measurement of petroleum asphalt and residual oil. A membrane filter of known weight is filtered, then dried, and then the weight of the insoluble matter filtered by the membrane filter is weighed. The principle of measuring asphalt is to use n-heptane to precipitate asphaltenes from the sample. After filtering, use n-heptane to reflux to remove the soluble components contained in the precipitate, and then use toluene to reflux to dissolve the precipitate to obtain asphaltenes. The deasphalted part is adsorbed on an alumina chromatographic column, and then washed out with n-heptane (or petroleum ether), toluene, toluene-ethanol, and correspondingly saturated components, aromatic components, and gums are obtained.

Technical Parameter 

1. Applicable standards: NB/SH/T0509 UOP 614-02

2. Measurement range:

① Saturation score 12~27%

② Aroma score 21~47%

③ Glue quality 31~55%

④ Asphaltene 0.01~20%

3. Heating method: electric heating tube heating

4. Circulation mode: circulation pump circulation

5. Evacuation method: vacuum pump

6. Vacuum degree: displayed by vacuum meter

7. Power of the whole machine: 3KW

8. Temperature control range: normal temperature~90℃

9. Working power supply: AC220V 50HZ

Main Feature 

1. Dedicated membrane filter, equipped with imported membrane filter;

2. The miniature vacuum pump is evacuated, with low noise and long life;

3. The vacuum gauge shows the degree of vacuum, which can be adjusted;

4. Stainless steel electric heater;

5. Imported plastic-steel gear pump circulation, no need to connect external circulating water;

6. The glass test tube meets the requirements of the standard and is equipped with a special holder;

7. Microcomputer temperature controller, PID temperature control, PT100 temperature sensor, high;

8. Split structure, easy to operate;