Automatic Open Flash And Fire Points Tester ASTM D92 Cleveland open cup apparatus ISO2592

Technical parameter

1. Display mode: LCD large screen display in Chinese and English

2. Display content:

① Control temperature and expected flash point set temperature.

② Fault prompt screen.

③ Each model parameter and air pressure setting.

3. Measuring range: room temperature～400℃

4. Measurement accuracy: 0.1℃

5. Cooling method: forced air cooling

6. Operating temperature: 10～55℃

7. Use humidity: 30～80%

8. Accuracy: flash point error 4 ℃, ignition point error 2 ℃

9. Repeatability: flash point error 6℃, ignition point error 8℃

10. Power supply: AC 220, 240V, 50, 60Hz

11. Power consumption: 380VA

12. Applicable standards: ASTM D92  ISO2592  GB/T3536

Main Feature

1. The instrument is automatically controlled by a microcomputer, and the entire test process and the printing of the measurement data are automatically carried out.

2. Large-screen English interface, the screen displays the test temperature, oil product number, test time, etc., and the entire test process is clear at a glance.

3. The micro-printer prints the results, and the cost is low.

4. The temperature is raised by a single-chip microcomputer program to ensure the accuracy of the results.

5. After the experiment, the instrument can be forced to air-cool automatically.

6. The flame size can be adjusted by itself.

7. Automatic lifting system for easy operation.

8. The shell is made of cold-rolled steel plate, and the surface is electroplated and sprayed, which is easy to clean and anti-corrosion.

9. Both manual and automatic operations can be performed during the test (manual or automatic separate test can also be selected).

10. Correction function: correction of current date, time, temperature and current atmospheric pressure

11. The instrument has a protection program and a self-diagnosis program

12. The main electrical components of the control department and the measurement department are imported components to ensure the reliability and stability of the instrument.

13. The instrument has a compact structure, small size and beautiful appearance

14. High degree of automation: Set the flash point parameters according to the operation mode on the LCD screen, press the "Start" button, and the whole test process will be carried out automatically.