Home > Products > Curtis Controller > Curtis bldc sepex motor controller for electric vehicle from 30 to 60 Kw
Curtis bldc sepex motor controller for electric vehicle from 30 to 60 Kw
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
-
Curtis 48V Brushless golf cart controller DC Sepex Motor Controller For Battery-powered Vehicle
-
curtis 1268-5403 dc sepex motor controller 36V 48V 400A
-
Curtis ev pwm 400a dc sepex motor programmable logic controller
-
electric car parts Curtis 48v dc sepex speed motor controller
-
Curtis 48V 400A Sepex Controller for electric veichle and forklift
-
24V Electric Bicycle Brushless Speed Motor Controller For E-bike & Scooter
Product Description
Product Description
Specifications:
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input current (no contactors engaged): * 160 mA without programmer
* 200 mA with programmer
* Logic input voltage: >7.5 V High; <1 V Low
* Logic input current: 10 mA
* Operating ambient temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: 85°C
* Heatsink undertemperature cutback: -25°C
* Package environmental rating: IP64 / IP67
CURTIS 1244-6661 SepEx controller is designed for heavy duty electric vehicles applications, wildly applied in 48V, 60V, 72V and
84V DC power driving system. For more details, please read carefully the CURTIS 1244 SepEx Controller Manual.
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input current (no contactors engaged): * 160 mA without programmer
* 200 mA with programmer
* Logic input voltage: >7.5 V High; <1 V Low
* Logic input current: 10 mA
* Operating ambient temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: 85°C
* Heatsink undertemperature cutback: -25°C
* Package environmental rating: IP64 / IP67
CURTIS 1244-6661 SepEx controller is designed for heavy duty electric vehicles applications, wildly applied in 48V, 60V, 72V and
84V DC power driving system. For more details, please read carefully the CURTIS 1244 SepEx Controller Manual.
Product Paramenters
Notice: For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS
1244 SepEx Controller Manual before making the purchase.
Notice: By default, we will deliver the controller with default setting of 72V / 600A / 5k-0Ω. For better applying the controller
to your system, the buyer should confirm with the seller the throttle type (0-5kΩ, 5k-0Ω or 0 – 5V, etc.).
Overview:
CURTIS 1244 MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of material
handling vehicles. These programmable controllers are simple to install, efficient, and cost effective. Typical applications
include low lifts, stackers, fork lifts, reach trucks, personnel carriers, counterbalance trucks, order pickers, boom trucks, and
other industrial vehicles.
The 1244 MultiMode™ controller offers smooth, silent, cost effective control of motor speed and torque. A four quadrant,
full-bridge field winding control stage is combined with a two quadrant, half-bridge armature power stage to provide solid state
motor reversing and regenerative braking power without additional relays or contactors. The 1244 controller can also be specified
to be compatible with CAN Bus communication systems.
The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The
programming device provides diagnostic and test capability in addition to configuration flexibility.
Key Features:
* CURTIS Model: 1244-6661
* Norminal Battery Voltage (Volts): 72V (default setting), 84V, 60V or 48V
* Amature Current Limit (amps): 600
* Amature 1 Minute Current Rating (amps): 600
* Amature 1 Hour Current Rating (amps): 140
* Field 2 Minute Current Rating (amps): 50
* Dimensions: L229xW178xH81 mm
* Net Weight: 3.9 kg
Features Include:
* Full-bridge field and half-bridge armature power MOSFET design, providing * infinitely variable forward, reverse, drive, and
brake control
* silent high frequency operation
* high efficiency
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Programmability through the 1313-4331 Handheld Programmer or 1314 PC Programming Station
* Complete diagnostics through the programmer and the internal Status LED
* Two fault outputs provide diagnostics to remotely mounted displays
* Continuous armature current control, reducing arcing and brush wear
* Automatic braking when throttle is reduced from either direction; this provides a compression braking feel and enhances safety
by automatically initiating braking in an operator hands off condition
* Deceleration Rate, Load Compensation, and Restraint features prevent downhill runaway conditions; speed is controlled to within
approximately 20% of level surface value
* MultiMode™ allows four user-selectable vehicle operating personalities
* Programmable to match individual separately excited motor characteristics
* Meets or exceeds EEC fault detect requirements
* Vehicle top speed is controlled and limited in each mode
* Linear temperature and undervoltage cutback on motor currents; no sudden loss of power under any thermal conditions
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Creep speed adjustable from 0% to 25% in each mode
* Continuous diagnostics during operation, with microprocessor power-on self-test
* Internal and external watchdog circuits ensure proper software operation
* Programmable coil drivers provide adjustable contactor pull-in and holding voltages
* Hour-meter enable output is active whenever the controller is providing motor current
* Optional Electromagnetic Brake Driver provides automatic control of an electromagnetic brake or other similar function
* Optional Reverse Signal Driver provides a low signal any time the vehicle is driving or braking in reverse
* Optional Auxiliary Driver provides a low signal to power an auxiliary contactor or other similar function
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Controller is programmable to provide throttle control of motor speed, applied motor voltage, or motor torque
* Can be configured for CAN Bus compatibility
1244 SepEx Controller Manual before making the purchase.
Notice: By default, we will deliver the controller with default setting of 72V / 600A / 5k-0Ω. For better applying the controller
to your system, the buyer should confirm with the seller the throttle type (0-5kΩ, 5k-0Ω or 0 – 5V, etc.).
Overview:
CURTIS 1244 MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of material
handling vehicles. These programmable controllers are simple to install, efficient, and cost effective. Typical applications
include low lifts, stackers, fork lifts, reach trucks, personnel carriers, counterbalance trucks, order pickers, boom trucks, and
other industrial vehicles.
The 1244 MultiMode™ controller offers smooth, silent, cost effective control of motor speed and torque. A four quadrant,
full-bridge field winding control stage is combined with a two quadrant, half-bridge armature power stage to provide solid state
motor reversing and regenerative braking power without additional relays or contactors. The 1244 controller can also be specified
to be compatible with CAN Bus communication systems.
The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The
programming device provides diagnostic and test capability in addition to configuration flexibility.
Key Features:
* CURTIS Model: 1244-6661
* Norminal Battery Voltage (Volts): 72V (default setting), 84V, 60V or 48V
* Amature Current Limit (amps): 600
* Amature 1 Minute Current Rating (amps): 600
* Amature 1 Hour Current Rating (amps): 140
* Field 2 Minute Current Rating (amps): 50
* Dimensions: L229xW178xH81 mm
* Net Weight: 3.9 kg
Features Include:
* Full-bridge field and half-bridge armature power MOSFET design, providing * infinitely variable forward, reverse, drive, and
brake control
* silent high frequency operation
* high efficiency
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Programmability through the 1313-4331 Handheld Programmer or 1314 PC Programming Station
* Complete diagnostics through the programmer and the internal Status LED
* Two fault outputs provide diagnostics to remotely mounted displays
* Continuous armature current control, reducing arcing and brush wear
* Automatic braking when throttle is reduced from either direction; this provides a compression braking feel and enhances safety
by automatically initiating braking in an operator hands off condition
* Deceleration Rate, Load Compensation, and Restraint features prevent downhill runaway conditions; speed is controlled to within
approximately 20% of level surface value
* MultiMode™ allows four user-selectable vehicle operating personalities
* Programmable to match individual separately excited motor characteristics
* Meets or exceeds EEC fault detect requirements
* Vehicle top speed is controlled and limited in each mode
* Linear temperature and undervoltage cutback on motor currents; no sudden loss of power under any thermal conditions
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Creep speed adjustable from 0% to 25% in each mode
* Continuous diagnostics during operation, with microprocessor power-on self-test
* Internal and external watchdog circuits ensure proper software operation
* Programmable coil drivers provide adjustable contactor pull-in and holding voltages
* Hour-meter enable output is active whenever the controller is providing motor current
* Optional Electromagnetic Brake Driver provides automatic control of an electromagnetic brake or other similar function
* Optional Reverse Signal Driver provides a low signal any time the vehicle is driving or braking in reverse
* Optional Auxiliary Driver provides a low signal to power an auxiliary contactor or other similar function
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Controller is programmable to provide throttle control of motor speed, applied motor voltage, or motor torque
* Can be configured for CAN Bus compatibility
Related Products
Our Company
Hefei Huanxin Technology Development Co.,Ltd, established in 2004, is a professional manufacturer engaged in the research, development, production, sales and service of Motor Controller, DC-DC Converter, Drive Wheel Assembly,Instrument Cluster, Switch, Accelerator and so on. Our company specialized in various kind of pallet trucks parts and forklift parts for both domestic and international markets.Also our company is the first-level agent of CURTIS BRAND and appointed of Britain Albright Contactor. In addition we have obtained ISO9001 and CE Certificates.Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your souring
requirement.We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
requirement.We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Packing & Delivery
UPS | FEDEX | TNT | DHL |
5-7days | 4-7days | 3-7days | 3-6days |
Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our
sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Please feel free to contact us if you have any problem!
Contact Us
- Hefei Huanxin Technology Development Co., Ltd.
Product Categories
New Products
-
24v 800w ebike brushless pm motor controller
-
24V AC Motor Controller,24V AC Voltage Regulator,Curtis AC Motor Controller 1232E-2321
-
mobility scooter parts Curtis pm motor controller 24v 90a
-
e-bike curtis pmc controller
-
24v 70a pwm dc motor controller for electric scooter/bicycle
-
Curtis Model 1230 AC Motor Controller
-
curtis 24v ac motor controller for pallet truck 1230-240
-
Curtis AC motor speed controller 1230-2402 for electric vehicle
-
Original Curtis AC Motor Controller 1234-5371
-
Curtis Controller 1268-5403 Used For Electric Forklift
-
Curtis PMC 1204M-5305 DC motor speed controller 325A 36V-48V for Club Cart
-
Club Car DC Motor 36V/48V Speed Controller 1234-5371
-
ecorider scooter parts, Curtis DC controller
-
Curtis 450A AC Motor Controller 1238-6401 48V/80V Traction Speed Controller
-
Curtis AC Controller 1238-6501 48-80V, 550A Original
-
Original Curtis AC 1238-5601 Motor Controller 36/48V 650A For Electric Forklift
-
Curtis controller 60/72V for Lvtong Golf Car 4Seats
-
bldc motor controller for e-rickshaw/e-tricycle/scooter 24v, 36v, 48v
-
Electric rickshaw spare parts 48v, 275a dc motor controller
-
Dc motor controller 36-48v curtis original controller
-
Bldc motor controller 72v programmable for electric scooter
-
24v, 36v, 48v, 60v, 72v electric scooter brushless dc motor controller
-
New Curtis Sepex 1243-4220 24-36V 200A EV DC Series Motor Controller
-
Curtis 36V/24V 200A EV DC Motor Controller 1243-4220
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebikes
- cart control
- dc controls
- dc dc controller 2012
- dc lift motor controler
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- animation motor controller
- at motor controller
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor Accessories > Motor Controller
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-