TRICONEX IMSS 4701X

Brand:TRICONEX

Type:IMSS 4701X

Origin:the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Block 3002 to 3006 or 3102 to 3106: Request from Processor to Module Offset Description 0 Write Block ID: 3002 to 3006 for Port 1 and 3102 to 3106 for Port 2 slave polling status request. 1 to (n-1) Spare Where n = 60, 120, or 240 depending on the Block Transfer Size parameter. Block 3002 to 3006 or 3102 to 3106: Response from Module to Processor Offset Description 0 Read Block ID: 3002 to 3006 or 3102 to 3106 requested by the processor. 1 Write Block ID: To be used by the processor in its next Write block. 2 Slave ID offset: Index of first slave in block 3 Number of slaves in this block 4 to 61 Slave polling status data 62 to (n-1) Spare Slave Status values Value Description 0 OK 1 Exceeded retry count and in error delay count mode 2 Block 3000 or 3100

8.4.5 Command Control Blocks (5001 to 5006, 5101 to 5106) Blocks 5001 to 5006: Port 1 Command Control Blocks 5101 to 5106: Port 2 Command Control If the CompactLogix or MicroLogix 1500-LRP processor sends a command control block, the module places the commands referenced in the block in the command queue. Commands placed in the queue with this method need not have their enable bit set. Only valid commands are placed in the queue. Up to 6 commands can be enabled and placed in the command queue with one write request from the CompactLogix or MicroLogix 1500-LRP processor. Blocks 5001 to 5006 or 5101 to 5106: Request from Processor to Module Offset Description 0 Write Block ID: 5001 to 5006 for Port 1 or 5101 to 5106 for Port 2. The last digit indicates how many commands are to be placed in the command queue by this block. 

1 Index in the command list for the first command to be entered into the command queue (applies to blocks 5001 to 5006 and 5101 to 5106). 2 Index for the second command (applies to blocks 5002 to 5006 and 5102 to 5106). 3 Index for the third command (applies to blocks 5003 to 5006 and 5103 to 5106). 4 Index for the fourth command (applies to blocks 5004 to 5006 and 5104 to 5106). 5 Index for the fifth command (applies to blocks 5005 to 5006 and 5105 to 5106). 6 Index for the sixth command (applies to blocks 5006 and 5106). 7 to (n-1) Spare Where n = 60, 120, or 240 depending on the Block Transfer Size parameter. Blocks 5001 to 5006 or 5101 to 5106: Response from Module to Processor Offset Description 0 Read Block ID: 5001 to 5006 or 5101 to 5106 requested by the processor. 1 Write Block ID: To be used by the processor in its next Write block. 2 Number of commands in the block placed in the command queue. 3 Number of commands in the command queue for the specified port. 4 to (n-1) Spare