Honeywell Analytics Sensepoint XCD RTD Transmitter SPXCDULNS2RM

Honeywell Analytics Sensepoint XCD RTD Transmitter SPXCDULNS2RM

SPXCDULNS2RM Sensepoint XCD RTD Transmitter, Sulfur Dioxide (SO2) 0-15 ppm, Aluminum Enclosure, Modbus by Honeywell Analytics

Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I, Div 2 areas.

You can mount the unit up to 100 feet from the transmitter to obtain maximum gas detection coverage in areas not easily accessible or where the sensor would not be visible, as in high-or low-level concealed areas, or detection outside the room being monitored. XCD RTD offers unrivaled flexibility and performance via its easily recognizable display (traffic light pattern) to convey safety status, communication and mounting options, and onboard diagnostics.

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

Get More Return on Investment from the Practical Advantages of XCD RTD. Sensepoint toxic and oxygen sensors detect a wide variety of industrial gases at common measuring ranges, adding flexibility to your gas monitoring program, reducing your parts procurement costs and expanding your safety net.

Remote gas monitoring has never been this easy and cost-effective. Mount the sensor as shown in the illustration and view gas safety status via the large tri-color display on the transmitter, up to 100 feet away from the sensor. The advantages of this remote monitoring system are added safety, and reduced time spent on maintenance. There's no need for your team to climb ladders or bring in specialized equipment to view gas concentration readings or to conduct a safety audit. What's more, the removable sensor design of Sensepoint XCD RTD cuts downtime and eliminates the need for specialized training.

Reduce Cost of Ownership Over Life of the Product

Cut stocking and procurement costs with a common transmitter platform

Reduce maintenance time and expense with non-intrusive, one-man operation

Simplify maintenance with plug-in, removable sensor

Reduce inspection and training time with tri-color 'traffic light' display conveying safety status at a glance

Simplify set-up and configuration with non-intrusive magnetic switches

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

Gain Added Flexibility, Reliability and Performance

Extend gas sensing element up to 100 feet (30 meters) from transmitter; mount in the most difficult to access areas

Reduce likelihood of human error via on-board diagnostics and easy-to-read display

Protect against dust/water ingress with IP66/67 rated stainless steel or aluminum enclosure

Prevent false alarms with auto-inhibit during maintenance

Select sink or source 4-20mA output; integral or remote configuration

Full range of accessories and purchase options let you choose the remote monitoring system that's right for your application

Use 3 wire, 4-20mA and RS485 MODBUS output fixed point detector with in-built alarm and fault relays for the protection of personnel and plant from toxic and oxygen hazards. Incorporating a transmitter with local display and optional remote mounted sensor, fully configurable via non-intrusive magnetic switch interface with a wide range integral and remote sensors available.

Electrical

Input Voltage Range 16 to 32VDC (24VDC nominal)

Max Power Consumption Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W

Maximum inrush current = 800mA at 24VDC

Current Output Sink or source

Relays 3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energised (programmable) Alarm relays default normally open/de-energized. Fault relay default normally open/energized

Communication RS485

Construction

Material Housing: Epoxy painted aluminium alloy LM25 or 316 stainless steel

Sensor: Polyphenylene sulfide (PPS) (see Sensepoint specifications)

Weight (approx) Aluminium Alloy LM25: 4.4lbs 316

Stainless Steel: 11lbs

Mounting Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3" (2" nominal)

Cable Entries 2 x 3/4" NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry used. Seal to maintain IP rating

Environmental

IP Rating IP67 in accordance with EN60529:1992

Certified Temperature Range 40°F to +149°F (-40°C to +65°C)

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

SPXCDULNG1

XCD Gas Detector, includes hydrogen EC sensor cartridge 0 to 1000ppm

SPXCDULNRXM

UL/INMETRO approved SP XCD Flammable Methane (CH4) IR 0-100% LEL (20 to 100% LEL, 10% LEL) with LM25, 3/4"NPT with Modbus

SPXCDULNRXM

UL/INMETRO approved SP XCD Flammable Methane (CH4) IR 0-100% LEL (20 to 100% LEL, 10% LEL) with LM25, 3/4"NPT with Modbus

SPXCDULNS2

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2

SPXCDULNS2

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2

SPXCDULNS2M

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Modbus, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2

SPXCDULNS2M

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Modbus, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2

SPXCDULNS2R

XCD DIV2 cCSAus LM25 SO2 0-15PPM JB

SPXCDULNS2R

XCD DIV2 cCSAus LM25 SO2 0-15PPM JB

SPXCDULNS2RM

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Modbus, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2 w/ Junction Box

SPXCDULNS2RM

Explosion Proof Transmitter (EC), 4-20mA, 3 Relays, Modbus, Sensepoint Toxic Sensor, Sulfur dioxide (SO2) 0-15 ppm Aluminum Enclosure, Class I, Div 2 w/ Junction Box

XCDRTDKIT

Calibration cover, potentiometer, adjustment tool, flow housing, regulator, tubing for XCD RTD (contains 2106B2114, 02000-A-1645, 998-100-012, 998-100-003, 998-100-004)

XCDRTDKIT

Calibration cover, potentiometer, adjustment tool, flow housing, regulator, tubing for XCD RTD (contains 2106B2114, 02000-A-1645, 998-100-012, 998-100-003, 998-100-004)